Torium 14 Problem

Started by Murphyslaw, October 11, 2011, 11:41:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Murphyslaw

I have a used Torium 14 that I picked up on Ebay.

When the drag is set heavier, I feel and hear a grinding sound when reeling putting moderate inward pressure on the reel handle towards the reel body. The grind is not full 360 degrees of the turn. At most 90 degrees.

No grind if I don't put any inward pressure. And the grind lessens as I decrease drag.

Any ideas at what's wrong? I don't want to crack the reel open at this point, as I may return to seller.

Thanks in advance,

Chris

akfish

Bearings. Your pinion bearing is shot.
Taku Reel Repair
Juneau, Alaska
907.789.2448

alantani

or the handle drive shaft bearing.....
send me an email at alantani@yahoo.com for questions!

Dominick

Hey Murph:  Don't send it back.  Email through ebay and ask for a discount to replace the bearings mentioned above.  Tell the seller the reel was not as described and you are going to give him a bad feedback unless he makes it right.  He should go for it and you will have fun getting your hands greasy.  Dominick
Leave the gun.  Take the cannolis.

There are two things I don't like about fishing.  Getting up early in the morning and boats.  The rest of it is fun.

Murphyslaw

Thanks for the help guys.

I was going to tinker with this anyways, so I'll see if seller will refund some money.

Chris