alan tani @ alantani.com fishing reel repair rebuild tutorial Okuma model 503--Need Help
Reel Repair by Alan Tani
May 21, 2019, 09:11:21 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Okuma model 503--Need Help  (Read 348 times)
0 Members and 1 Guest are viewing this topic.
Porthos
Member
*
Online Online

Posts: 630



« Reply #15 on: May 10, 2019, 03:37:46 AM »

Update.  I just came from the garage where I have the piece soaking in liquid wrench.  To my surprise it has loosened the spindle and it rotares!...I am going to let it soak for awhile and try to reassemble it...

The long soak will be the key. Cleaning off the corrosion/gunk that locked up the two parts and then applying marine grade grease will keep SW from seizing it up again.

The unshielded bearing in your pics also looks like it can use a soak and clean as well. Afterwards, pack it with marine grease. Everything in the gear case should get a coating of marine grease.
« Last Edit: May 10, 2019, 03:44:37 AM by Porthos » Logged
Donnyboat
donnyboat
Photo Group
Member
**
Online Online

Posts: 1073


« Reply #16 on: May 10, 2019, 08:53:32 AM »

Hi Gouthro, once you get the shaft out, get some very fine wet n dry cloth, maybe 2500, give the shaft a very light rub, also inside the pinion, try to hone it out just enough to remove the corrocion, then lube it, also roll the shaft along a flat table, should tell you if it is bent, good luck, cheers Don.
Logged

Don, or donnyboat
gouthro
Member
*
Offline Offline

Posts: 11


« Reply #17 on: May 14, 2019, 11:22:15 AM »

Thanks for the encouragement.  I’m slowly making my way when I get a chance.  I thought I had all the pieces marked but in putting it together i seem to have problems with the anti reverse.wonder if anyone knows how it should fit? Grin


* image.jpg (1590.13 KB, 4032x3024 - viewed 8 times.)
Logged
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.193 seconds with 17 queries.