avet 30 exw maintenance

Started by cjg05601, May 08, 2019, 11:10:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

cjg05601

i purchased the reel used so wanted to take it apart and lube everything up. i was following the great tutorial on here and felt i disassembled/assembled everything properly but now the reel does not feel as smooth as my other 30w. the only thing i noticed when assembling was the pressed in pin on the reel handle where the 2speed button is was crooked i straightened it out as best i could but still no improvement. i was wondering if its possible i used too much penn reel grease and it gummed up the works? need some advice