alan tani @ alantani.com fishing reel repair rebuild tutorial P229M bearing question
Reel Repair by Alan Tani
October 13, 2019, 03:54:27 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: P229M bearing question  (Read 337 times)
0 Members and 1 Guest are viewing this topic.
Recoil Rob
Member
*
Offline Offline

Posts: 126



« on: July 02, 2019, 06:00:12 PM »

I just got through putting an ultimate drag stack in my 229M. I noticed the left side bearing cup has a tension spring under the bearing, (#), it's a spring steel crescent washer.

Thing is my reel had 2 of them stacked in there. I see none on the schematic for the right side cup. Is this something they used to fine tune reels and the number can vary? I only put one back and it seems fine, actually gives me a bit more range of adjustment.


thanks,

 Rob
« Last Edit: July 02, 2019, 06:00:56 PM by Recoil Rob » Logged
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
*****
Online Online

Posts: 10269


The Reel Whisperer


« Reply #1 on: July 02, 2019, 07:46:52 PM »

You only need one of those spring washers in the bearing cup.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Recoil Rob
Member
*
Offline Offline

Posts: 126



« Reply #2 on: July 02, 2019, 09:48:43 PM »

Thanks.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.181 seconds with 17 queries.