alan tani @ alantani.com fishing reel repair rebuild tutorial Daiwa Saltiga Z40 - standard servicing
Reel Repair by Alan Tani
December 06, 2019, 08:52:52 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Daiwa Saltiga Z40 - standard servicing  (Read 25304 times)
0 Members and 4 Guests are viewing this topic.
exp2000
Sensei
Member
***
Offline Offline

Posts: 805


Broome Western_Australia


WWW
« Reply #15 on: August 24, 2016, 11:30:40 AM »

I just did one of these but could not find the schematics anywhere. Does anyone know where to find them?

Nice piece of kit but the drag washers in the one I did were questionable. The inside diameter was larger than the drive shaft so they could float around! Might have to take some measurements and knock up some correct ones.

Thanks for posting the rebuild Red. I would have been lost without the handle knob trick Wink
~
« Last Edit: August 24, 2016, 05:29:50 PM by exp2000 » Logged
exp2000
Sensei
Member
***
Offline Offline

Posts: 805


Broome Western_Australia


WWW
« Reply #16 on: August 24, 2016, 07:04:14 PM »

1. Regarding chipped Dartanium drag washer.

OK. Assuming the stack I dealt with is standard, there was ONE washer which was a neat fit on the shaft. This one should be placed under the eared metal washer near the top of the stack as it cannot float like the others so will not be chipped by the bent ears.

2. Regarding the hair spring on the sliding pinion carriage.

I found that in the position illustrated in the pics that it would foul against the release mechanism and often dislodge during operation. The correct position is with the short arm seated in the reel body and the longer bent  arm seated in the sliding mechanism.

In this position, the spring stays clear of moving parts and does not foul during operation. Furthermore, it's form actually locks in place when the release lever is thrown showing it is designed for this position.

~
« Last Edit: August 24, 2016, 07:17:14 PM by exp2000 » Logged
redsetta
Moderator
Member
****
Offline Offline

Posts: 2746


Auckland, New Zealand


« Reply #17 on: August 24, 2016, 07:59:00 PM »

Thanks exp - that's good advice re: the clutch spring.
You've a keen eye!
Luckily the owner hasn't had any issues with it, but it's definitely something I'll follow up on when I see him next.
Cheers, Justin
Logged

Fortitudine vincimus - By endurance we conquer
exp2000
Sensei
Member
***
Offline Offline

Posts: 805


Broome Western_Australia


WWW
« Reply #18 on: August 24, 2016, 08:59:05 PM »

Schematics courtesy Daiwa Australia:

* SALTIGA Z40.pdf (129.26 KB - downloaded 130 times.)
« Last Edit: August 24, 2016, 08:59:39 PM by exp2000 » Logged
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.208 seconds with 16 queries.