alan tani @ alantani.com fishing reel repair rebuild tutorial Shimano Stradic 4000FH
Reel Repair by Alan Tani
September 15, 2019, 04:27:51 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Shimano Stradic 4000FH  (Read 285 times)
0 Members and 1 Guest are viewing this topic.
2Rod
Member
*
Offline Offline

Posts: 7


« on: August 24, 2019, 07:30:01 PM »

I am having issues with a Stradic 4000FH.  The reel spins and sounds normal when just turning the handle, but when there is a fish on the reel makes a more noticeable ticking sound when turning the handle and bringing the fish to the boat.

Can anyone help identify what part(s) I need to look into replacing?

Thanks for your help!
Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 17631



« Reply #1 on: August 24, 2019, 08:10:23 PM »

hopefully someone can help.  i just don't know enough about spinners......   Undecided
Logged

send me an email at alantani@yahoo.com for questions!
oc1
Sensei
Member
***
Online Online

Posts: 2486



« Reply #2 on: August 24, 2019, 09:13:29 PM »

Is that the drag click going off?  I know even less about spinners.
-steve
« Last Edit: August 24, 2019, 09:14:45 PM by oc1 » Logged
Gfish
Gfish
Member
*
Online Online

Posts: 2100


What? Me worry?


« Reply #3 on: August 24, 2019, 09:23:18 PM »

Are you able to disassemble the reel and check the moving parts?
Logged

Fishing tackle is an art form and all fish caught on the right tackle are"Gfish"!
2Rod
Member
*
Offline Offline

Posts: 7


« Reply #4 on: August 25, 2019, 08:21:53 AM »

Yes, I can disassemble the reel. 

I have cleaned and lubricated several times in the years I have owned it. 
Also replaced the felt drag washers with carbon fiber washers.  I have done this on multiple different Stradic models I own and none have caused any issue.  I do not believe it is the drag.

I also replaced Part 6130 - Roller Clutch Assy, which did not resolve the issue. 

I am looking for insight on what specific parts in the reel could be the problem when it is under load. 
Any suggestions?
Logged
foakes
Moderator
Member
****
Offline Offline

Posts: 5979


Sierra National Forest


« Reply #5 on: August 25, 2019, 08:34:48 AM »

One of the most knowledgeable folks about Shimano Spinners on our site — is philaroman.

Best,

Fred
« Last Edit: August 25, 2019, 08:36:53 AM by foakes » Logged

“We are all made better and stronger than our excuses”

There are ten reasons to consider when choosing your next fishing reel.

The first is to pick a reel you like — The other nine reasons don’t matter.
Gfish
Gfish
Member
*
Online Online

Posts: 2100


What? Me worry?


« Reply #6 on: August 25, 2019, 10:54:39 AM »

I'd start with the handle b.bearings, move to the pinion b.bearing, then look at the ossilation system and then check the gear teeth with magnification. This is based on my 2 fj's, the fh must be an earlier model, and may be diffrent.
Philoroman! You there?
« Last Edit: August 25, 2019, 10:55:37 AM by Gfish » Logged

Fishing tackle is an art form and all fish caught on the right tackle are"Gfish"!
Wolli
Firearms Group
Member
**
Offline Offline

Posts: 205



« Reply #7 on: August 25, 2019, 02:05:18 PM »

replace the line roller bearing (RD7915) and the problem ist solved.  Dimensions 4x8x3

Good Luck
Logged

love jigging    www.jupiter-sunrise-lodge.com/de/
Authorized Jigging Master Service Partner (in Germany)
2Rod
Member
*
Offline Offline

Posts: 7


« Reply #8 on: August 25, 2019, 04:56:00 PM »

Thanks for all the replies.  I will order a new line roller bearing and install it.
I will let you know the results in a week or so.

Thanks!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.19 seconds with 18 queries.