alan tani @ alantani.com fishing reel repair rebuild tutorial Talica 8II antireverse
Reel Repair by Alan Tani
October 15, 2019, 09:31:16 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Talica 8II antireverse  (Read 267 times)
0 Members and 1 Guest are viewing this topic.
Bigtuna101
Member
*
Offline Offline

Posts: 2


« on: August 27, 2019, 11:09:34 AM »

Hello new to the forum. I have a question. have any of you successfully upgraded a talica 8ii 2 speed with true anti reverse bearing? I am looking for someone to do this work for me on 2 of the reels.

I was told that the single speed talica uses the anti reverse bearing and that it could be installed on the 2 speed.

I love the reels and use them for slow pitch jigging but would love to find a way to get the slight amount of back movement out of the reverse. 

I have heard there are other options as well such as carefully machining more "teeth" into the dog gear.

any thought son this would be very welcome. also if you know any one who would do this work for me would be appreciated as well.

Kind regards,

CL
Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 17740



« Reply #1 on: August 27, 2019, 04:20:08 PM »

Hello new to the forum. I have a question. have any of you successfully upgraded a talica 8ii 2 speed with true anti reverse bearing? I am looking for someone to do this work for me on 2 of the reels.

I was told that the single speed talica uses the anti reverse bearing and that it could be installed on the 2 speed.

I love the reels and use them for slow pitch jigging but would love to find a way to get the slight amount of back movement out of the reverse. 

I have heard there are other options as well such as carefully machining more "teeth" into the dog gear.

any thought son this would be very welcome. also if you know any one who would do this work for me would be appreciated as well.

Kind regards,

CL

it should be a direct "plug in."  that any number of us could do.  as far as the ratched gear goes, that would be a more involve process.  ideally you would have to change the "angle" of the leaf spring dog as well.  i would not recommend changin the ratchet gear without changing the dog.  i'm about a month out, with fishing trips interspersed.  hopefully someone here would have more time.  otherwise, send me a pm.  alan
Logged

send me an email at alantani@yahoo.com for questions!
boon
Sensei
Member
***
Online Online

Posts: 472


« Reply #2 on: August 27, 2019, 04:51:42 PM »

You are correct that the single speed uses an ARB but I don't know that one will transplant into the sideplate.
The ball bearings on the driveshaft are the same part on both reels so presumably the driveshaft dimensions are the same.

Really you need someone with both reels and some calipers to take some measurements.... the ARB is not available as a standalone part, as far as I know, so you may have to work out what the part is and order it directly from a bearing distributor.
Logged

alantani
admin
Administrator
Member
*****
Online Online

Posts: 17740



« Reply #3 on: August 27, 2019, 05:01:31 PM »

i have a bunch of AR bearings.  there are a dozen "standard" sizes that are used in reels. it's gotta be one of them!
Logged

send me an email at alantani@yahoo.com for questions!
steelfish
the Baja Guy
Sensei
Member
***
Online Online

Posts: 3184


Sea of Cortez


« Reply #4 on: August 27, 2019, 05:05:41 PM »

didnt 2 speed reels need some backplay in order to switch gears when pushing the buttom?

thats why even the more expensive 2 speed reel in the market dont have that ARB bearing

Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 17740



« Reply #5 on: August 27, 2019, 05:11:07 PM »

they do, but they will still work. 
Logged

send me an email at alantani@yahoo.com for questions!
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.19 seconds with 17 queries.