alan tani @ alantani.com fishing reel repair rebuild tutorial Newell 300 Series Generation 2 Aluminum Side Plate Kits
Reel Repair by Alan Tani
December 12, 2019, 11:29:37 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Newell 300 Series Generation 2 Aluminum Side Plate Kits  (Read 1251 times)
0 Members and 1 Guest are viewing this topic.
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10307


The Reel Whisperer


« on: September 14, 2019, 06:00:05 PM »

Well, it's been a while since we were able to produce these kits again.  There was a minor improvement in the jack shift lever area like the 400 series, but overall, they are of the same design and Gen1.

https://alantani.com/index.php?topic=17264.0

The 20 kits are available in each of the 5 colors, black, silver, purple, ice blue and green.  













The kit will include:
     Two adjustable bearing cups
     Two Viton O-rings.
     Two ABEC-5 bearings
     Clicker spring and two Allen clicker spring screws
     Clicker button, Teflon side plate guard, clicker dog, and retaining c-clip
     Four stainless steel Allen head bridge screws
     12 stainless steel Allen head frame screws
     Three sizes of Allen Wrenches, 5/64", 3/32", and 7/64" to assemble your reel



Please note that there are a few kits that will include hardware kits that looks like below.  The difference is that you will noticed that there is a small screw included with the Allen wrenches.  This is the clicker spring screw that was missed, so please be careful when opening the hardware bags so you don't misplace this extra screen.



Due to the increase in machining, polishing, anodizing and hardware costs, these kits are offered for $160 each plus $10 for shipping in the USA.

If you purchase more than one kit, shipping in the USA will be an additional $5 for each additional kit purchased.

If shipping will be international, please advise when sending me a message with your address so that I can get you a shipping quote.

PM me if you are interested and I'll send you payment instructions.

Thank you for your interests.

Bryan
« Last Edit: September 14, 2019, 06:01:17 PM by Bryan Young » Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10307


The Reel Whisperer


« Reply #1 on: September 14, 2019, 06:03:01 PM »

Please note that when assembling, use a good marine grease on all screws, bearing up threads, and where there's metal to metal contact to prevent corrosion.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10307


The Reel Whisperer


« Reply #2 on: September 16, 2019, 10:35:20 PM »

Quantities Remaining

                  Black 15
                  Silver 18
                  Purple 19
                  Blue 17
                  Green 19
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
sabaman1
Member
*
Online Online

Posts: 131



« Reply #3 on: September 17, 2019, 08:29:22 AM »

Bryan, what model brideplates are these designed for?
Logged

JIM
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10307


The Reel Whisperer


« Reply #4 on: September 17, 2019, 09:16:31 AM »

Bryan, what model brideplates are these designed for?

Hi Jim, 300 series Newell reels.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
sabaman1
Member
*
Online Online

Posts: 131



« Reply #5 on: September 17, 2019, 09:35:28 AM »

Bryan, what model brideplates are these designed for?

Hi Jim, 300 series Newell reels.

Does that include the Blackies?
Logged

JIM
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10307


The Reel Whisperer


« Reply #6 on: September 17, 2019, 02:05:04 PM »

Hi Jim,

It will fit the blackie bridge but you will need a later free spool shift lever.  I have asked Cortex Conversion to machine some out of one piece stock of stainless steel and for the blackie users and its on his schedule.  Not sure of the time frame as of yet.  Sorry.

If you can find a free spool shift lever from the P-series to S-series, then all you need to do is replace the shift lever and you will be able to use these side plate kits.

Bryan
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
davem
Member
*
Online Online

Posts: 2


« Reply #7 on: September 17, 2019, 05:31:09 PM »

If they're machined like the 400 series kits, they're going to be awesome. I'll be putting the check in the mail tomorrow.

Thanks, Bryan.
Logged
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10307


The Reel Whisperer


« Reply #8 on: September 17, 2019, 05:57:56 PM »

If they're machined like the 400 series kits, they're going to be awesome. I'll be putting the check in the mail tomorrow.

Thanks, Bryan.
They are machined by Cortez Conversions for me.  They are awesome and precision made to tight tolerances.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10307


The Reel Whisperer


« Reply #9 on: September 19, 2019, 08:05:16 PM »

Inventory remaining...

Available - Black 13
                  Silver 16
                  Purple 19
                  Blue 17
                  Green 18
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
jjdbike
Member
*
Offline Offline

Posts: 36


« Reply #10 on: November 29, 2019, 02:30:00 PM »

Hello Bryan,

I just sent you a PM about side plates and tuning my custom Newell 332 & 533.
I'd like red side plates for both if possible please.
If not, black would be fine too.
Please respond to my PM and let me know what next steps should be.
Thanks!
JD
Logged
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10307


The Reel Whisperer


« Reply #11 on: November 29, 2019, 02:52:15 PM »

Hi JD,

Sorry. No red. Only the colors posted I the thread.

PM replied.

Thank you.

Bryan
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
jjdbike
Member
*
Offline Offline

Posts: 36


« Reply #12 on: November 29, 2019, 04:12:09 PM »

Hi JD,

Sorry. No red. Only the colors posted I the thread.

PM replied.

Thank you.

Bryan

Thanks Bryan.

Black is fine.
 
Along w/ side pleates, also looking for service and potentially upgrades / mods.

I repied to you PM again about this.

Respectfully,
JD
Logged
Swami805
Member
*
Online Online

Posts: 2712


« Reply #13 on: November 29, 2019, 05:57:46 PM »

I bought a set of plates to add another in 332 size. I used a bridge from a 440 no letter so I’d have 2 dogs with an 8 tooth gear sleeve so they would alternate.I attached a metal washer to the gear sleeve ( Newell nut method)so could use Bryan’s 5+1 drag kit  I used a graphite spool for good free spool. Bryan’s kits are very well made, no real tweeking needed
Looking forward to getting it wet!!


* EC9C4E38-DCB3-49A0-BED3-0440EAB55142.jpeg (2608.42 KB, 4032x3024 - viewed 19 times.)

* 25265588-6F87-4367-A1E3-87B93EB14991.jpeg (3564.19 KB, 4032x3024 - viewed 17 times.)

* 0D178966-E353-420D-B9D2-CEF6A9849AA7.jpeg (4534.92 KB, 4032x3024 - viewed 17 times.)

* 6D13F7FF-294E-4E92-9B83-4D654D5AEF69.jpeg (2810.85 KB, 4032x3024 - viewed 17 times.)
Logged
r8rs4lf
Member
*
Offline Offline

Posts: 83


« Reply #14 on: December 03, 2019, 05:33:54 AM »

Nice job!

Sadly, my plates and narrow kit are still sitting on the shelf waiting to be assembled. Still looking for that right priced 300 series to start the build.
« Last Edit: December 03, 2019, 05:34:50 AM by r8rs4lf » Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.214 seconds with 19 queries.