alan tani @ alantani.com fishing reel repair rebuild tutorial Talica 12 2speed
Reel Repair by Alan Tani
October 22, 2019, 12:32:29 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Talica 12 2speed  (Read 76 times)
0 Members and 1 Guest are viewing this topic.
Fin chaser
Member
*
Offline Offline

Posts: 1


« on: September 17, 2019, 05:33:39 PM »

Hello ..I'm a reel repair guy located in l.a(lower Alabama)...I have rebuilt a talica 12 2speed.....new bearings anti reverse....gears etc....my problem is. Everything works when reel is apart but as soon as I put reel together anti reverse doesn't work.  Remove screws take apart it works..I'm at Whit's end....I took it all back apart reassembled and still no anti reverse....any help would b greatly appreciated
Logged
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
*****
Offline Offline

Posts: 10272


The Reel Whisperer


« Reply #1 on: September 17, 2019, 08:28:48 PM »

When assembling the reel, you need to make sure that the pressure plate on the spool is well seated on the square of the pinion gears. This isn’t one of the things I hate about servicing this reel because it is sometimes difficult to know if the spool is seated well in the pinion gear or not due to the anti-reverse assembly.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.191 seconds with 16 queries.