alan tani @ alantani.com fishing reel repair rebuild tutorial Mitchell 300-301, 304-305, 314-315, and 408-409 Schematics with Parts List
Reel Repair by Alan Tani
September 21, 2020, 02:26:54 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Mitchell 300-301, 304-305, 314-315, and 408-409 Schematics with Parts List  (Read 1212 times)
0 Members and 1 Guest are viewing this topic.
mo65
The Freshwater Kid...Chillicothe, Ohio
Sensei
Member
***
Offline Offline

Posts: 4020


"This ship is filthy Mr. Christian!"


« on: November 23, 2019, 05:57:37 AM »

  Last but not least...here are the smaller Mitchells. Cool


* s-l1600.jpg (1154.13 KB, 1079x1524 - viewed 128 times.)

* s-l1600 (2).jpg (1069.44 KB, 1128x1411 - viewed 104 times.)

* s-l1600 (3).jpg (913.28 KB, 1040x1328 - viewed 107 times.)

* s-l1600 (1).jpg (1156.63 KB, 1053x1323 - viewed 106 times.)
« Last Edit: December 15, 2019, 01:23:50 PM by mo65 » Logged

~YOU CAN TUNA GEETAR...BUT YOU CAN'T TUNA FEESH~

Fullbail
Photo Group
Member
**
Offline Offline

Posts: 18


« Reply #1 on: March 10, 2020, 07:23:22 AM »

mo65,
Thank you for posting the schematic/parts list for the Mitchell 300 from 1969.

Just wanted to point out that the numbers that are in parenthesis on the parts list are the old (pre-1969) part numbers.  The older part numbers were all changed to 5-digit numbers in 1967.
  
Also, note the two sets of spools shown.  The upper set are the newer model spools (9121, 9122), with the 3-lobed Drag Adjusting Knob (81001) and Teflon Drag Washer (81003). On the newer designed spools the Teflon Drag Washers go in the front of the spool, under the Drag Spring (81002).

The bottom pair of spools shown are the older model (9101, 9102) with 4-lobed Drag Adjusting Knobs (81158). The older model spools also had Teflon washers but they were called Teflon Base Washers (130) and were installed at the bottom of the spool, between the Spindle (81006) and the Spool Shell (3-small, 4-large) on both capacity spools.

Kind Regards,
Bill
« Last Edit: March 10, 2020, 08:09:06 AM by Fullbail » Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.173 seconds with 19 queries.