alan tani @ alantani.com fishing reel repair rebuild tutorial Daiwa 1600C, a look inside
Reel Repair by Alan Tani
August 05, 2020, 04:42:59 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Daiwa 1600C, a look inside  (Read 854 times)
0 Members and 1 Guest are viewing this topic.
festus
Sensei
Member
***
Online Online

Posts: 1498



« on: December 12, 2019, 03:04:15 PM »

There are plenty of the Daiwa silvers still out there on ebay, so I grabbed this 1600C.  Also have a 1300X and 2600C on the way.  We have enough Daiwa C model tutorials already, but someone out there might get their hands on a 1600C that needs service or repair.  Suppose they do an internet search for the 1600C and discover this site?  If so, they can use this thread and the other C tutorials for reference since there is little variation between models other than anti-reverse assemblies. 

This one was clean on the outside as the others, but definitely need serviced.  Reeling was sluggish but the bail functioned perfectly.


After removing this screw the entire handle assembly will slide right out.



Removing the body cover.



Removing the oscillating slide screw allows removal of the axle and spool.



A look at the drive gear.  Those plastic bushings are referred to a metal bearings on the schematic?


A look at the oscillating slide and oscillating gear.


Removing the oscillating slide and oscillating gear.




Removing 12mm righthand threaded rotor nut allows removal of rotor.



A look at the anti-reverse components and ball bearing retaing washer.


Removing ratchet.



Removing click gear.



Removing pinion and ball bearing. The washer and 3 screws may be removed without taking apart the a/r assembly if you're careful. 


A look at the drag assembly.


I failed to get pics of a few steps but there should be sufficient info to complete reassembly.

These would be considered size 40 reels comparing them to other brands.  Line capacity is 425/6, 300/8, 235/10, 175/12, and 140/15.  Mine weighs 14.8 oz on my digital scales.




Logged
festus
Sensei
Member
***
Online Online

Posts: 1498



« Reply #1 on: December 12, 2019, 03:06:15 PM »

Schematic


* schmtc1.jpg (144.72 KB, 1177x699 - viewed 68 times.)

* schmtc2.jpg (224.97 KB, 988x671 - viewed 64 times.)
Logged
happyhooker
Member
*
Offline Offline

Posts: 1263



« Reply #2 on: December 12, 2019, 07:24:23 PM »

Thanks again, festus, for the effort & time to give us a good look at a nice reel.

Frank
Logged
Midway Tommy
Tom
Sensei
Member
***
Offline Offline

Posts: 1926


Smack dab in the middle of USA - Eastern Nebraska


« Reply #3 on: December 12, 2019, 09:32:15 PM »

Chester,

Your herd of Daiwas is getting almost as large as your pack of Heddons.  Shocked You can only fish with one or two at a time!  Grin You are quickly becoming the go to guy on them. Seems like just yesterday that you were all over them there Shakes.  Smiley   
Logged

Love those open face spinning reels! (Especially ABU & ABU/Zebco Cardinals)

Tommy D (ORCA), NE



Favorite Activity? ............... In our boat fishing
RELAXING w/ MY BEST FRIEND (My wife Bonnie)
mo65
The Freshwater Kid...Chillicothe, Ohio
Sensei
Member
***
Online Online

Posts: 3933


"This ship is filthy Mr. Christian!"


« Reply #4 on: December 13, 2019, 05:50:42 AM »

   Nice clear look inside Chester. I like the AR set up on these 1600s. I've had my eye on the X series model...probably bidding against Chester on these...but I doubt we run each other up too much. We both drive a hard bargain. Grin
Logged

~YOU CAN TUNA GEETAR...BUT YOU CAN'T TUNA FEESH~

Crow
Member
*
Online Online

Posts: 1942


Dauphin Island Sunset


« Reply #5 on: December 13, 2019, 07:24:11 AM »

Another great walk-through, Festus !!
Logged

There's nothing wrong with a few "F's" on your record....Food, Fun, Flowers, Fishing, Friends, and Fun....to name just a few !
Donnyboat
donnyboat
Photo Group
Member
**
Online Online

Posts: 1950


« Reply #6 on: December 13, 2019, 01:31:19 PM »

Nice work Chester, and thanks for the schematics, cheers Don.
Logged

Don, or donnyboat
Ruffy
Firearms Group
Member
**
Offline Offline

Posts: 214



« Reply #7 on: January 13, 2020, 04:35:28 AM »

Chester,
Above you said you were getting a 1300x, has that come in? Just wondering what the internals are like (separate oscillation gear? AR on main or pinion?).

Cheers,
Andrew
Logged
festus
Sensei
Member
***
Online Online

Posts: 1498



« Reply #8 on: January 13, 2020, 08:18:15 AM »

Chester,
Above you said you were getting a 1300x, has that come in? Just wondering what the internals are like (separate oscillation gear? AR on main or pinion?).

Cheers,
Andrew
Andrew, I made a mistake in my post, I should have said I was getting a 1600X, not a 1300X.  https://alantani.com/index.php?topic=30063.0
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.199 seconds with 17 queries.