Avet sx and Mx drags

Started by jeff smith, December 19, 2019, 06:11:55 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jeff smith

Hi, Is there any way of changing the configuration and or number of the Belleville washers on the above avets to make the drag less harsh. Here in the UK, we don't need the high poundage drag numbers, and would prefer something a little more progressive in the drag department.

alantani

The softest configuration will be "()()." If the are already in that configuration and it's still too stiff, then you will have to carefully measure the original bellevilles and then go on line and find thinner bellevilles. 
send me an email at alantani@yahoo.com for questions!

jeff smith

Quote from: alantani on December 19, 2019, 06:43:42 PM
The softest configuration will be "()()." If the are already in that configuration and it's still too stiff, then you will have to carefully measure the original bellevilles and then go on line and find thinner bellevilles. 
Thanks Alan, I'll open them up and take a look.