alan tani @ fishing reel repair rebuild tutorial Daiwa 7290D Problem
Reel Repair by Alan Tani
February 28, 2020, 12:46:55 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Login Register  
Pages: [1]   Go Down
Author Topic: Daiwa 7290D Problem  (Read 173 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 109

« on: December 25, 2019, 08:41:11 AM »

Picked up one of these off ebay.  It was turning very rough and sticking when I got it.  Some idiot had 50# test on the spool.  My initial guess was the gears are stripped.  After cleaning it up and regreasing I noticed that a few of the teeth on the gears are rounded just a tad and particularly in one spot when winding.  So this reel was a loss and I will keep it for parts I recon. 
One thing I had a question on if anyone can help is according to the schematic the spool gear is combined with the spool as "one piece"?  I just wanted to make sure that it doesn't come out of the spool?  I would have to have a spool and the drive gear to make it work again, unless I am missing something here. 
Online Online

Posts: 18100

« Reply #1 on: December 25, 2019, 09:00:33 AM »

found the schematic!  there is no pinion gear listed, so i think it's at the base of the rotor as a single unit.

* DAIWA SPINNING 7290D(75-035).pdf (523.03 KB - downloaded 8 times.)
« Last Edit: December 25, 2019, 09:09:51 AM by alantani » Logged

send me an email at for questions!
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.275 seconds with 17 queries.