alan tani @ alantani.com fishing reel repair rebuild tutorial Accurate Magnum 4/0 Build
Reel Repair by Alan Tani
August 14, 2020, 05:20:32 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1] 2   Go Down
  Print  
Author Topic: Accurate Magnum 4/0 Build  (Read 2495 times)
0 Members and 1 Guest are viewing this topic.
xjchad
Sensei
Member
***
Online Online

Posts: 1417



« on: January 07, 2020, 09:22:08 AM »

Starting a cool build for Darin. 
He sent me this Accurate Magnum 4/0 to go through and upgrade.
This is a sweet little reel!  Compact and solid with the 6/0 drivetrain, not much it won't stop!

Started with a complete tear down and cleaning.


Lots of upgrades for this one too, I'll post more as I go.
Logged

Husband, Father, Fisherman
________________
Chad Bussanich
CJ's Reel and Rig
Reel service, repair, and customizations
cjsreelandrig@gmail.com
https://www.facebook.com/CJsReelandRig/
David Hall
Firearms Group
Member
**
Online Online

Posts: 3749



« Reply #1 on: January 07, 2020, 09:53:20 AM »

that is a monster reel fr sure, I have one that I need to one day go through,  Keep posting so I can follow what you're doing with this beauty.
Logged
Swami805
Member
*
Online Online

Posts: 3135


« Reply #2 on: January 07, 2020, 10:20:09 AM »

4 dogs, this should be good,
Logged
xjchad
Sensei
Member
***
Online Online

Posts: 1417



« Reply #3 on: January 07, 2020, 10:24:54 AM »

4 dogs, this should be good,

LOL, that's just a bag of stainless dogs Darin sent to work with, only 2 will be used  Wink
Logged

Husband, Father, Fisherman
________________
Chad Bussanich
CJ's Reel and Rig
Reel service, repair, and customizations
cjsreelandrig@gmail.com
https://www.facebook.com/CJsReelandRig/
steelfish
the Baja Guy
Sensei
Member
***
Online Online

Posts: 3500


Sea of Cortez


« Reply #4 on: January 07, 2020, 12:48:12 PM »

thats the reel Im waiting for Tom to make the sideplates, the problem would be the spool with the bigger shaft.


Logged
Alto Mare
Moderator
Member
****
Offline Offline

Posts: 13173


Southeastern Pennsylvania


« Reply #5 on: January 07, 2020, 01:47:14 PM »

Nice reel Darin, Chad will do a nice job with it.



thats the reel Im waiting for Tom to make the sideplates, the problem would be the spool with the bigger shaft.

Alex, we have members here that could get any spool made, but Iím not sure on cost or if they have time in their schedule .

Sal
« Last Edit: January 07, 2020, 01:48:11 PM by Alto Mare » Logged

Forget about all the reasons why something may not work. You only need to find one good reason why it will.
steelhead_killer
Member
*
Online Online

Posts: 959


Andy


WWW
« Reply #6 on: January 07, 2020, 04:00:53 PM »

Beautiful reel!  Can't wait to see the final product.

Andy
Logged

><)))">
Maxed Out
Keep Clam !!
Sensei
Member
***
Online Online

Posts: 2937



« Reply #7 on: January 07, 2020, 05:19:49 PM »

 Its hard to tell from your picture, but I recall the 4/0 Magnum having huge gear housing that is obviously making room for the 114h gear set. Definitely a beast !!
Logged

We Must Never Forget Our Veterans....God Bless Them All !!
steelfish
the Baja Guy
Sensei
Member
***
Online Online

Posts: 3500


Sea of Cortez


« Reply #8 on: January 07, 2020, 05:38:20 PM »

Alex, we have members here that could get any spool made, but Iím not sure on cost or if they have time in their schedule .

Sal

pretty sure of that Sal,

I think its a project that it will have great acceptance with the ohana, just like those "tiburon" special frames that Randy make along with tiburon

Logged
xjchad
Sensei
Member
***
Online Online

Posts: 1417



« Reply #9 on: January 14, 2020, 03:27:26 PM »

More progress on this build.

Modified a stainless steel 114H yoke since the original brass one had some really bad wear.  I had made another brass one, then Darin sent a SS one which will be much better.



I machined the head plate for a second dog.



Bryan Young 7+1 drag kit ready for assembly (with Cal's of course).



I found an easier way to install the bridge while keeping the dogs and springs in place!
1.  Assemble the main gear to the sleeve with the delrin under gear washer, drag stack, belville, and spacer sleeve.



2.  Install the eccentric, jack, yoke, springs, and pinion into the head plate.



3.  Insert the main gear/sleeve assembly into the cavity in the head plate.



4.  Install the dogs and springs.



5.  Insert the bridge post into the sleeve, position the bridge, and tighten the bridge screws.



6.  Now there is enough room outside of the head plate to install the sleeve retainer pin!





Be sure that the pin is a good fit before final assembly so that it snaps right in.

I'll finish final assembly and finished pics will be up soon.  This reel is awesome!
« Last Edit: January 14, 2020, 03:43:31 PM by xjchad » Logged

Husband, Father, Fisherman
________________
Chad Bussanich
CJ's Reel and Rig
Reel service, repair, and customizations
cjsreelandrig@gmail.com
https://www.facebook.com/CJsReelandRig/
Darin Crofton
Tampa, FL Photographer
Firearms Group
Member
**
Offline Offline

Posts: 1022


Work is for people who don't fish!


WWW
« Reply #10 on: January 14, 2020, 03:34:49 PM »

Awesome build bro, thank you for doing this for me, I know it's going to be a grouper killa!
Logged

God, Family and Fishing, what else is there?
xjchad
Sensei
Member
***
Online Online

Posts: 1417



« Reply #11 on: January 14, 2020, 03:44:09 PM »

Awesome build bro, thank you for doing this for me, I know it's going to be a grouper killa!

You're welcome Darin, thanks for the opportunity!
Logged

Husband, Father, Fisherman
________________
Chad Bussanich
CJ's Reel and Rig
Reel service, repair, and customizations
cjsreelandrig@gmail.com
https://www.facebook.com/CJsReelandRig/
Alto Mare
Moderator
Member
****
Offline Offline

Posts: 13173


Southeastern Pennsylvania


« Reply #12 on: January 14, 2020, 03:50:59 PM »

Awesome build Chad👍.
Itís going to be a killer reel.
I also use thread protector cap on my gear sleeve to keep everything intact, no reason to be a hero trying without, it really helps on the double dogs.

Looks like you could use that black and red custom knob Darin.
I know youíve asked me a while back, if it is too late, not a problem.
I finally was able to walk in my workshop today, it was in such a rough shape that every time I attempted to go in, I turned around🙂.

Enjoy that reel buddy!
Logged

Forget about all the reasons why something may not work. You only need to find one good reason why it will.
Crow
Member
*
Online Online

Posts: 1947


Dauphin Island Sunset


« Reply #13 on: January 14, 2020, 05:02:24 PM »

Good job, Chad !
Logged

There's nothing wrong with a few "F's" on your record....Food, Fun, Flowers, Fishing, Friends, and Fun....to name just a few !
Darin Crofton
Tampa, FL Photographer
Firearms Group
Member
**
Offline Offline

Posts: 1022


Work is for people who don't fish!


WWW
« Reply #14 on: January 14, 2020, 09:51:05 PM »

Awesome build Chad👍.
Itís going to be a killer reel.
I also use thread protector cap on my gear sleeve to keep everything intact, no reason to be a hero trying without, it really helps on the double dogs.

Looks like you could use that black and red custom knob Darin.
I know youíve asked me a while back, if it is too late, not a problem.
I finally was able to walk in my workshop today, it was in such a rough shape that every time I attempted to go in, I turned around🙂.

Enjoy that reel buddy!
Hey Sal, It's ready when you are buddy, I already told Chad about the knob you were going to make for me, but it would be a little while. He's got a handle and knob that's going on my CC 9/0 that he's going to use for pictures, but your knob will live
on this Magnum. Thank you for thinking of me, no rush, when you feel up to it my friend!
Logged

God, Family and Fishing, what else is there?
Pages: [1] 2   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.215 seconds with 18 queries.