unknown sleeve

Started by basto, February 13, 2020, 05:16:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

basto

Can anyone tell what reel the gear sleeve at the bottom of photo is for?
It is the same in all dimensions as the 200 sleeve above it, except for the milled out section at the base.
thanks
Basto

DAM Quick 3001      SHIMANO Spedmaster 3   Jigging Master PE5n

mo65

   It looks like a recess for a felt washer...for holding oil maybe?
~YOU CAN TUNA GEETAR...BUT YOU CAN'T TUNA FEESH~


thorhammer

i would imagine its another iteration of the 200 sleeve- try it and see if the pin holes line up and you should have your answer. All my x-master sleeves are flat like that as i recall

alantani

it's just really old......   :-\
send me an email at alantani@yahoo.com for questions!

basto

Thanks for your replies guys.
Greg
DAM Quick 3001      SHIMANO Spedmaster 3   Jigging Master PE5n

Maxed Out

We Must Never Forget Our Veterans....God Bless Them All !!

Hardy Boy

Todd

Alto Mare

Greg, if you're thinking of upgrading that sleeve, check the the post, it might be thinner than the later ones.

Sal
Forget about all the reasons why something may not work. You only need to find one good reason why it will.

basto

Sal, I think you nailed it. I now  remember buying it for my old 155 and it was too loose on its post.
If they had a part number on them it would make things a lot simpler.
thanks mate
Greg
DAM Quick 3001      SHIMANO Spedmaster 3   Jigging Master PE5n