What's the point?

Started by publius, April 14, 2020, 12:00:48 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

publius

I obviously don't know anything about cradle reels. They look really cool. I take it that the cradle is basically a model specific frame that you build the reel around? What was the point of them? Strength?

oc1

For a low center of gravity,  I've always questioned the inherent strength because the ferrule between handle and tip is so short.
-steve

Benni3

I think they started making the Neptune reel cradles in the 50's and are very collectible and very cool looking,,,,,, 8) I could have gotten 1 with a ocean city for $25 but didn't because at the time I did know,,,,,, >:( you can't buy everything $150 on vintage lures at that estate sale was enough,,,hehe,,,,,,, ;D

publius


Jim Fujitani

Additionally, the line as it came off the spool, was more in line with the stripper guide rather than going through at an angle even with the roller guides.  So the line was closer to parallel the rod as it went in and out of the guides. 

The original "low profile" reel design.

Vintage Offshore Tackle

The cradle also served the same purpose as a Tiburon or Accurate aluminum frame does today.  It maintained the side plates and spool in perfect alignment, as compared with the stock Penn posts and stamped base which allowed the reel to torque under heavy load.  This was a major benefit when fishing the heavier line classes.

publius

That makes perfect sense Vintage tackle. Basically turns a Senator into a legitimate big game reel. The line coming off parallel to the guides would definitely be a plus. Wonder if they would sell today, or maybe some type of reel seat on the rod that lowers the reel.

oc1

#7

publius

Haha, yes, I guess so, oc1. I've got a dozen of those sitting in the garage gathering dust.

oc1

#9
I need a long two-handed rod but often think about extending one of those old baitcasting handles because the grip is usually canted downward.  That would really help the balance.  Matching the handle ferrule is the difficult part.
-steve

Ron Jones

I remember your thread about bent handles and balance, one of the clearest reasonings I've read on here.

The Man
Ronald Jones
To those who have gone to sea and returned and to those who have gone to sea and will never return
"