alan tani @ alantani.com fishing reel repair rebuild tutorial corrosion
Reel Repair by Alan Tani
June 19, 2019, 11:07:50 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: corrosion  (Read 5161 times)
0 Members and 1 Guest are viewing this topic.
alantani
admin
Administrator
Member
*****
Online Online

Posts: 17344



« on: December 07, 2008, 09:37:02 AM »

i had a gentleman on another board tell me that i should not grease things that were not intended to be grease by the manufacturer.  well, here's what happens when you fail to maintain your gear.  doesn't matter what brand of reel we're looking at, the end result is the same. i fixed this one a couple of evenings ago. the drag and all of the bearings were toast.
 

 

 

 


here's the reel foot from an accurate foot.  note the beginnings of corrosion.  i installed longer phillips head screws and tightened them down until they were firmly seated.  the grease will insure that this reel foot can be serviced if needed.  the owner has been instructed to check it periodically. 









« Last Edit: April 04, 2009, 07:39:17 PM by alantani » Logged

send me an email at alantani@yahoo.com for questions!
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.201 seconds with 19 queries.