alan tani @ alantani.com fishing reel repair rebuild tutorial Grandwave Z 20 Anti-Reverse Bearing
Reel Repair by Alan Tani
October 22, 2020, 09:25:04 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Grandwave Z 20 Anti-Reverse Bearing  (Read 155 times)
0 Members and 2 Guests are viewing this topic.
wussero
Member
*
Offline Offline

Posts: 5


« on: October 16, 2020, 01:13:36 PM »

Can anyone help me find a Anti-reverse roller bearing for the for GrandwaveZ 20, maybe the part dimensions of this?  Having some difficulty find this part for the reel.

Thanks.

Logged
alantani
admin
Administrator
Member
*****
Offline Offline

Posts: 18810



« Reply #1 on: October 16, 2020, 03:13:42 PM »

i have all of the common sizes.  they measure in millimeters - inside diameter, height and outside diameter.  cheap digital calipers are very helpful. 
Logged

send me an email at alantani@yahoo.com for questions!
day0ne
Member
*
Online Online

Posts: 785


« Reply #2 on: October 16, 2020, 09:08:55 PM »

Have you tried calling Daiwa?
 (800) 736-4653
Logged

David


"Lately it occurs to me: What a long, strange trip it's been." - R. Hunter
wussero
Member
*
Offline Offline

Posts: 5


« Reply #3 on: October 16, 2020, 10:43:25 PM »

Thanks for the replies.

I did call Daiwa, but they did not know the bearing diameter.

Any suggestions on how to remove this anti reverse bearing from the reel?

I was reading somewhere to use a 10 mm socket?
Logged
alantani
admin
Administrator
Member
*****
Offline Offline

Posts: 18810



« Reply #4 on: October 17, 2020, 07:22:46 AM »

usually they just tap out, well supported underneath to avoid damage to the side plate, but it's best if i could see a photo. 
Logged

send me an email at alantani@yahoo.com for questions!
wussero
Member
*
Offline Offline

Posts: 5


« Reply #5 on: October 18, 2020, 08:17:30 AM »

Sorry about the delay,  was a busy Sat for me.  Did an oil change and had to get family stuff ready.

I got the bearing out of the reel, now the issue is, removing the bearing from the plastic around it?  Is this possible?

Also, I got the approx measurements with my calipers.  

Approx:
1 CM inner diameter=10 mm
1.3 CM outer diameter=13 mm
Width, can't measure due to plastic in the way.


* 20201018_090103.jpg (5552.3 KB, 4032x3024 - viewed 20 times.)
« Last Edit: October 18, 2020, 08:22:11 AM by wussero » Logged
alantani
admin
Administrator
Member
*****
Offline Offline

Posts: 18810



« Reply #6 on: October 18, 2020, 08:57:29 AM »


I got the bearing out of the reel, now the issue is, removing the bearing from the plastic around it?  Is this possible?


the AR bearing gently presses out.  it's an EWC 10 something.  i think the plastic case was supposed to stay put......   Undecided
« Last Edit: October 18, 2020, 09:00:16 AM by alantani » Logged

send me an email at alantani@yahoo.com for questions!
wussero
Member
*
Offline Offline

Posts: 5


« Reply #7 on: October 18, 2020, 11:49:34 AM »

Lol,

I did that.  I guess there is not much more than I can do?

Replace the roller bearing and cage in parts?
Logged
wussero
Member
*
Offline Offline

Posts: 5


« Reply #8 on: October 18, 2020, 01:52:31 PM »

Good news!

I cleaned out the grease within the anti reverse bearing, then I just small dabs so the little metal feet for the rollers would fit.  That fixed the anti reverse issue.  Whew!  All working now.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.21 seconds with 21 queries.