Will this work well for making shims?

[basenjib123]

What do you think of this for making shims? ...  https://www.harborfreight.com/9-piece-punch-and-die-set-95547.html

[oldmanjoe]

  Are you trying to make  : Washer shims" ?      If you are , i would try this first .  https://www.harborfreight.com/9-piece-hollow-punch-set-3838.html
   You can punch the outside diameter first than do the inside diameter . 
   You may be able to use the hollow punch to help center the pin / or other punch  to center the inside hole .

[alantani]

don't laugh.  for thin teflon and thin carbon fiber, i actually have a full set of these and they work pretty well!!!!

https://www.amazon.com/EK-Tools-Circle-1-50-Inch-Package/dp/B0090JVGFU/ref=sr_1_17?dchild=1&keywords=hole+punch&qid=1605049856&sr=8-17

[Dominick]

Ha ha ha... I'm sorry, I couldn't help myself.    Dominick

[basenjib123]

Thanks for the replies....I am trying to make round brass shims for reels if that helps.