2200 II Schematic

Started by sandbar, December 03, 2020, 01:31:14 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

sandbar

Does anyone have a schematic for this reel?
The spool is knocking at the bottom of the stroke inside the rotor.
I think there is a washer/spacer missing.
Thank You
-Steve

philaroman

search the model on this forum -- it's been done ;D could be under Compac Atlas III(?)
also sold as a Dimond and Pflueger...  all OEM by Omori/Ohmori
four chances at a schematic, LOL

Midway Tommy

It is comparable to the Pflueger 640 II. There are no shims between the bearing retainer and rotor. The 640 II schematic shows 2 washers between the spindle and spool. Maybe your spindle isn't seated deep enough or just needs some shim adjustments.
Love those open face spinning reels! (Especially ABU & ABU/Zebco Cardinals)

Tommy D (ORCA), NE



Favorite Activity? ............... In our boat fishing
RELAXING w/ MY BEST FRIEND (My wife Bonnie)

happyhooker

Don't know if this will help any.

Frank

sandbar

#4
Thank You Frank
That will help when I get around to doing a full rebuild.

Tommy
Thank You for the tips.
There was a metal washer/shim under the rotor.
I removed it and the knocking is gone.
There was only a red fibre washer under the spool.
The metal washer that was under the rotor is too small to
fit under the spool. Maybe when I rebuild the reel I'll figure out where it belongs.
Now I have a washer missing from under the spool.
What problems might that cause down the road?
Thank You
-Steve

Wolli

this may help

www.planetseafishing.com/reel-schematics/shakespeare-models/
love jigging    www.jupiter-sunrise-lodge.com/de/
Authorized Jigging Master Service Partner (in Germany)

Midway Tommy

Quote from: Wolli on December 04, 2020, 01:08:49 AM
this may help

www.planetseafishing.com/reel-schematics/shakespeare-models/

All those listed are either Sigmas or skirted spool models. No help for the 2200 II, but here it is (below).

Also, there is supposed to be a thin bushing/washer between the ridge on the pinion and the bearing. Is it possible that your extra shim washer is to go there?
Love those open face spinning reels! (Especially ABU & ABU/Zebco Cardinals)

Tommy D (ORCA), NE



Favorite Activity? ............... In our boat fishing
RELAXING w/ MY BEST FRIEND (My wife Bonnie)