Okuma rox 20

Started by Benni3, February 07, 2021, 02:07:17 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Benni3

Going from a pflueger patriarch xt 30 $250 to a $25 okuma rox 20 hehe,,,,,, :D Big difference the weight is Twice as much and cranking was like climbing a rickety ladder,,,,the drag was jerky,,,,,,, :o "but that's ok"after taking it apart greasing,,,, with a little oiling here and there,,,, cal's grease on the filt drag washers it's not so bad,,,,,,,, ;D

alantani

if you get a chance, measure the inside and outside diameters of the felt drag washers and i'll send you some carbon fiber drags to replace them!!!!   ;D
send me an email at alantani@yahoo.com for questions!

Gobi King

Bennie
I have a bunch of these
Switching out the drag mat makes huge improvement

After the upgrade u should use an electronic scale and set drag to 0.3555 lb
I feel ensuring accuracy to the 1000th decimal place is criticalis  ;D
Shibs - aka The Gobi King
Fichigan

Donnyboat

Nice reel, Alan, how thick are the CF washer your suggesting for that reel, cheers Don.
Don, or donnyboat

alantani

the penn #6-60 ht-100 washer usually works in these.  i mostly need the outside diameter.  it doesn't have to be exact. 
send me an email at alantani@yahoo.com for questions!

Benni3

Quote from: alantani on February 07, 2021, 05:07:28 PM
the penn #6-60 ht-100 washer usually works in these.  i mostly need the outside diameter.  it doesn't have to be exact. 
Got this at horrible fake,,,,,, ;D

alantani

a set of penn ht-100 #6-155's will fit perfectly.  three, right?  i'll get them into the mail tomorrow. 
send me an email at alantani@yahoo.com for questions!

Benni3

Thank's my friend,,,,,,,, ;D