alan tani @ alantani.com fishing reel repair rebuild tutorial How To Upgrade Saltiga 15H to Auto Engage
Reel Repair by Alan Tani
May 08, 2021, 08:07:01 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: How To Upgrade Saltiga 15H to Auto Engage  (Read 728 times)
0 Members and 2 Guests are viewing this topic.
Bucktail
Member
*
Offline Offline

Posts: 423



WWW
« on: March 03, 2021, 11:24:10 PM »

Hello Alan and everyone!
I have been away from this board for quite some time and I am happy to see that it is still in existence.
I am hoping somebody can share their knowledge in transforming a USA model Saltiga 15 H into an auto engage clutch system (i.e. the reel engages when the handle is turned like on a baitcaster). I saw a video on Charkbait with the real tech there, Sergey, showing a Saltiga 10 that he had modified to be an auto engage clutch. They mentioned that they were going to make a tutorial but so far havenít. Does anyone here have any advice on how to make this happen?
Thanks all!
Logged

xaf
Member
*
Offline Offline

Posts: 160


« Reply #1 on: March 04, 2021, 01:35:03 AM »

Watching!  I'm also interested.
Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 19417



« Reply #2 on: March 04, 2021, 04:40:16 PM »

there is likely an eccentric jack, a spring and a ratchet with a pin that you need to switch out.  if you can figure out which reel those parts came from, they could be switched out.  maybe just call and ask charkbait for the part numbers.  the techs at daiwa might know as well. 
Logged

send me an email at alantani@yahoo.com for questions!
Bucktail
Member
*
Offline Offline

Posts: 423



WWW
« Reply #3 on: March 05, 2021, 01:35:51 AM »

Thanks Alan. I found a YouTube video from somebody else.  Still need to find those part numbers. 👍🏻
Logged

Bucktail
Member
*
Offline Offline

Posts: 423



WWW
« Reply #4 on: March 05, 2021, 02:29:07 AM »

Actually itís not much of a tutorial, but itís something.  Cheesy
Logged

Bucktail
Member
*
Offline Offline

Posts: 423



WWW
« Reply #5 on: March 05, 2021, 04:17:09 AM »

Just adding on to this as I learn how to do it, in case anyone else is interested. 
Here is the schematic.  https://cdn.shopify.com/s/files/1/0384/6645/3641/files/SASD10-15H.pdf
You will need:
32  E70-8101 SIDE PLT (AUTO CLUTCH)
33  E70-5401 SPRING
46  E70-8201 RACHET (AUTO CLUTCH)
Logged

Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.046 seconds with 21 queries.