Jigmaster Drags

Started by joesquid, March 24, 2021, 07:57:56 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

RowdyW

#15
The reel has to be assembled for the pinion gear to be in proper alignment. The jack & yoke will be out of alignment when the pinion is not in alignment too.

joesquid

Fixed.....   So in order to get the jack squared I took a look at the tabs on it.  The angle looked identical but I thought if I bent the one it would make the jack square to the yoke.  Worked. Thanks for your help!  Got me thinking and learned a bit more.  On to a Squidder.

thorhammer

Jack tabs were gonna be my next suggestion. That's a nice older one you have- all chrome goodies and steel main.