Shimano torsa 40 Bearing Help

Started by Pezcarrete Reparaciones, April 23, 2021, 02:08:47 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Pezcarrete Reparaciones

Hello

I'm repairing a very abused Shimano Torsa 40.
All the bearings will be changed.
Unfortunately the one way bearing is in very bad shape It came apart,  this part is not numbered in the schematic.
Can anyone help me with the pat number?

alantani

#1
what is the height in mm?  if the height is 12mm, then you likely have an EWC 1012..  
send me an email at alantani@yahoo.com for questions!

alantani

let me know if you need help finding the bearing. 
send me an email at alantani@yahoo.com for questions!

Pezcarrete Reparaciones

#3
Thank you Alan

I really appreciate the help with the torsa 40 bearing problem l!!!

And thank you again for this amazing forum that is lots of help for many reels.

I'm starting to think this is not a one way bearing but only a needle roller bearing since the reel has a dog anti reverse system.
Could that be the case?

Pezcarrete Reparaciones

I just found an awesome  bearing supplier on the web (Plaig Bearings) it has the Torsa 40 schematic with all the bearings marked.

Including the one is not marked by Shimano.

The bearing is according to the site is  BNT2949.

All feedback is appreciated.


alantani

It is definitely a one way roller bearing with a leaf spring dog back up.
send me an email at alantani@yahoo.com for questions!

Pezcarrete Reparaciones

Thank you for the anti-reverse clarification

Now I'm in need of a new power handle for the same reel P/N TGT1207

But It seems to be discontinued.

Can anyone point to where I can  get a economic replacement option

Pezcarrete Reparaciones

Well the bearing that the Plaig bearings webpages affirms to be the correct one ( BNT2949) is incorrect, I will fiit and probably it will work but it is way shorter than the torsa 40 original.
I will be trying the one you told me Alan(EWC 1012) .

thanks again

Pezcarrete Reparaciones

#8
Hi

the EWC 1012 is the right size but the "teeth"  are to wide for the side plate

other suggestions?