alan tani @ alantani.com fishing reel repair rebuild tutorial Penn Levelwind 309 Spool
Reel Repair by Alan Tani
June 16, 2021, 07:24:52 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Penn Levelwind 309 Spool  (Read 443 times)
0 Members and 1 Guest are viewing this topic.
oc1
Sensei
Member
***
Offline Offline

Posts: 4147



« Reply #15 on: April 28, 2021, 07:11:46 AM »

In desperation, you could put tiny brass washers between the posts/stand and the rings.  It will widen the frame.  I've seen the washers at the local hardware store.
« Last Edit: April 28, 2021, 07:13:54 AM by oc1 » Logged
Wompus Cat
ENTREMANURE DAS GROSEN
Photo Group
Member
**
Online Online

Posts: 478


REEL WHISPERER


WWW
« Reply #16 on: April 28, 2021, 12:34:39 PM »

After looking at all the shimming bending and stuuf you have done on this ,you may have a Frankenreel!
Need to get a known Good 309 and compare measurements to get a mean to go by.
 
Logged

EVERYTHING TO EXCESS !
MODERATION IS FOR MONKS
thorhammer
Firearms Group
Member
**
Online Online

Posts: 4905


"You can't drank all day if you don't start..."


« Reply #17 on: April 28, 2021, 02:54:54 PM »

Greg I wonder if that hasn't been "repaired' with an LB 65 spool.
Logged
Mic
Member
*
Offline Offline

Posts: 174


« Reply #18 on: April 28, 2021, 06:25:08 PM »

GFish,
 Took my 309 apart and it would appear my spool is the same as yours. A three piece spool that appears to be able to be separated by the hex nuts on both ends once the snap ring clip and gear are removed

 No part number on mine either. Looks like this type of spool could be used for several different reels if the center bushing was replaced by wider or narrower piece ? Maybe/Maybe KNOT

 I can get measurements if it if needed

 Mic


* Penn_309_.jpg (1705.93 KB, 4032x3024 - viewed 14 times.)

* Penn_309_2.JPG (2221.67 KB, 4032x3024 - viewed 13 times.)

* Penn_309_DriveSide.jpg (1770.88 KB, 4032x3024 - viewed 15 times.)

* Penn_309_Spool_GearSide.jpg (1845.54 KB, 4032x3024 - viewed 12 times.)
Logged
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.079 seconds with 21 queries.