Newell 5-1 Gears

[Bill_N]

I have a S338-3.6 and a 440-3.6 that I'd like to change over to 5-1. Are these parts available?

Thanks, Bill

[alantani]

originals?  no.  only aftermarket.  but stock 4:1 penn jigmaster gears should work. 

[Bill_N]

Who are the aftermarket sources? I'm not finding them online

[Swami805]

Gear sets pop up on ebay from time to time, other than that it's hard to find them. Be easier to sell those and buy a few reels

[alantani]

https://www.prochallenger.com/product/112h-or-jigmaster-500-501-standard-gear-set-kit/63?cs=true&cst=custom

[PacRat]

Bill,
If you're willing to part with one of those 3.6:1 gear sets; shoot me a PM and let me know what you'd want for one.
-Mike

[Bill_N]

I looked on eBay briefly but only saw some main gears. Will the Jigmaster gear set fit both the 338 & 440?

[Bill_N]

I looked on eBay briefly but only saw some pinion gears. Will the Jigmaster gear set fit both the 338 & 440?

If I can get the 5-1 gears I think I'll hold onto the 3.6-1 gears for spares.

[Bryan Young]

I looked on eBay briefly but only saw some pinion gears. Will the Jigmaster gear set fit both the 338 & 440?

Only the 4:1 gear set will fit. The pinion gear of the 5:1 gear set has a smaller collar than Newell's gear set.

[Bill_N]

All I see on eBay for both reels are main gears, no pinions. Seems weird to me.

[Swami805]

I could use a few pinions, i have a few orphan main gears.  Never seem to see them on ebay

[Black Pearl]

https://www.prochallenger.com/product/112h-or-jigmaster-500-501-standard-gear-set-kit/63?cs=true&cst=custom

I thought that Jigmaster 505/506 gear set might fit Newell. I could be wrong.

I made this set by copying Newell gear set https://www.prochallenger.com/product/jigmaster-505-506-stainless-steel-gear-set/71?cs=true&cst=custom

This one is the 3.6:1 https://www.prochallenger.com/product/3-6-1-newell-200-300-and-400-series-stainless-steel-gear-set/32?cs=true&cst=custom

[Bryan Young]

https://www.prochallenger.com/product/112h-or-jigmaster-500-501-standard-gear-set-kit/63?cs=true&cst=custom

I thought that Jigmaster 505/506 gear set might fit Newell. I could be wrong.

I made this set by copying Newell gear set https://www.prochallenger.com/product/jigmaster-505-506-stainless-steel-gear-set/71?cs=true&cst=custom

This one is the 3.6:1 https://www.prochallenger.com/product/3-6-1-newell-200-300-and-400-series-stainless-steel-gear-set/32?cs=true&cst=custom

Alan,

If you made the collar on your 5:1 pinion the same inside diameter as your 4:1 pinion gear, then yes, it'll fit. If not, it will not fit because the 5:1 pinion has a smaller inside diameter collar.

[Bill_N]

Can you verify the fit as Bryan is saying above?

https://www.prochallenger.com/product/112h-or-jigmaster-500-501-standard-gear-set-kit/63?cs=true&cst=custom

I thought that Jigmaster 505/506 gear set might fit Newell. I could be wrong.

I made this set by copying Newell gear set https://www.prochallenger.com/product/jigmaster-505-506-stainless-steel-gear-set/71?cs=true&cst=custom

This one is the 3.6:1 https://www.prochallenger.com/product/3-6-1-newell-200-300-and-400-series-stainless-steel-gear-set/32?cs=true&cst=custom