Avet G2 SX

Started by RUSTY OLD COLT, July 22, 2021, 05:50:19 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

RUSTY OLD COLT

Has anybody serviced a Avet g2  SX reel? Is the drag washer glued to the spool like the earlier models  ?

akfish

Yes the drag washer is glued to the spool. That's rarely a problem. If it gets contaminated with salt, scrub it clean then apply a very thin coat of Cal's Drag Grease and you're good to go.
Taku Reel Repair
Juneau, Alaska
907.789.2448

mmayo

It should be like a raptor on the outside and a traditional SX inside.  Grease that drag and get off as much grease as possible.
Kites fly the highest against the wind, not with it.