alan tani @ alantani.com fishing reel repair rebuild tutorial Dolphin-621 LW
Reel Repair by Alan Tani
October 21, 2021, 02:58:00 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Dolphin-621 LW  (Read 1257 times)
0 Members and 1 Guest are viewing this topic.
jgp12000
Firearms Group
Member
**
Online Online

Posts: 267


« Reply #15 on: October 03, 2021, 01:30:50 PM »

Ok I have the spring on the correct side.
« Last Edit: October 03, 2021, 07:28:48 PM by jgp12000 » Logged
jgp12000
Firearms Group
Member
**
Online Online

Posts: 267


« Reply #16 on: October 03, 2021, 07:06:40 PM »

I gave the pawl a <Kroil> bath because it did have some chrome missing with a few rust spots. After the Kroil bath, I rotated it with emery cloth by hand. I slathered the pawl with Super Lube and put some in the cup before screwing it down. It seems to be working better now although, it sometimes still hangs up but if I speed up my retrieve it will return.  If anyone gets bored...I know you are all busy, I am curious if any other pawl would work for this reel, now that I know it's the pawl and not the worm.

thanks for all the help guys!
James
« Last Edit: October 03, 2021, 08:20:22 PM by jgp12000 » Logged
foakes
Moderator
Member
****
Offline Offline

Posts: 7773


Sierra National Forest


« Reply #17 on: October 03, 2021, 08:19:22 PM »

On clients’s Penns or Ambassadeurs, I typically replace both the pawl and the worm if there is a catch or a travel issue.

No come-backs or drama that way.

Because, sure enough, when replacing one or the other — the one not replaced will often fail afterwards.

That pawl looks pretty rough.

Best, Fred

Logged

The Official, Un-Authorized Service and Restoration Center for quality vintage spinning reels.

D-A-M Quick, Penn, Mitchell, and ABU/Zebco Cardinals

---------
You can keep knocking on doors that never open — or you can make your own door…and walk through it.

I’m not striving to be the guy with the most parts in the graveyard.
oldmanjoe
Photo Group
Member
**
Offline Offline

Posts: 1157



« Reply #18 on: October 03, 2021, 09:39:34 PM »

I gave the pawl a <Kroil> bath because it did have some chrome missing with a few rust spots. After the Kroil bath, I rotated it with emery cloth by hand. I slathered the pawl with Super Lube and put some in the cup before screwing it down. It seems to be working better now although, it sometimes still hangs up but if I speed up my retrieve it will return.  If anyone gets bored...I know you are all busy, I am curious if any other pawl would work for this reel, now that I know it's the pawl and not the worm.

thanks for all the help guys!
James
   Just make sure you have the cap down all the way a 1/4 turn is a huge adjustment .
     You could post the measurement of the paw , it might help get you one .
    I have a paw that i think is too big .186 diameter - .268 long .
« Last Edit: October 03, 2021, 09:40:38 PM by oldmanjoe » Logged

Grandpa`s words of wisdom......Joey that thing between your shoulders is not a hat rack.....    use it.....
A mind is like a parachute, it only work`s  when it is open.......
 Forget about all the reasons why something may not work. You only need to find one good reason why it will.   Alto Mare
handi2
Sensei
Member
***
Online Online

Posts: 3694


OCD Reel Service and Repair


« Reply #19 on: October 03, 2021, 09:58:28 PM »

I have asked him to look for a spare reel on the net. It’s been a while since I’ve had one of these.
Logged

OCD Reel Service & Repair
Gulf Breeze, FL
oc1
Sensei
Member
***
Offline Offline

Posts: 4469



« Reply #20 on: October 04, 2021, 04:39:02 AM »

The reason Penn put a spare pawl in the tailplate of their Peerless reels is that the worm-and-pawlis a poor design prone to wear and trouble.  To make it even worse, we are still using that design on modern reals.  Come on engineers; it's time for a new mouse trap.
Logged
jgp12000
Firearms Group
Member
**
Online Online

Posts: 267


« Reply #21 on: October 04, 2021, 09:27:47 AM »

I will try to measure soon, headed to Helen trout fishing, trout eating, wine/beer tasting and eating too much...rained the whole trip but we ate some good German food, pork Schnitzel,German potato salad,onion soup, and a pretzel at Bodensee in Helen.Anna Ruby Falls is a must see,.Charlemagne's Kingdom(model trains) is permanently closed sorry I never got to see that.The trains were from Germany ,flyer stated.I didn't find any DQ maybe next time.
« Last Edit: October 06, 2021, 04:20:01 PM by jgp12000 » Logged
Wompus Cat
ENTREMANURE DAS GROSEN
Sensei
Member
***
Offline Offline

Posts: 943


REEL WHISPERER


WWW
« Reply #22 on: October 04, 2021, 02:37:16 PM »

The reason Penn put a spare pawl in the tailplate of their Peerless reels is that the worm-and-pawlis a poor design prone to wear and trouble.  To make it even worse, we are still using that design on modern reals.  Come on engineers; it's time for a new mouse trap.

The material used for the Pawl is softer than the Worm gear and they KNEW it would wear sooner than the Worm and had a lot of Failures .
Pflueger was one of the First to put spare Pawls in the side plates for that very reason till manufacturing cuts for Greed got in the way ...lol
Here are some other ways by two other Reel Makers to Level Wind your String .
They worked quite well .



* P1170402.JPG (1719.71 KB, 4000x3000 - viewed 7 times.)

* P1170401.JPG (1850.63 KB, 4000x3000 - viewed 7 times.)
« Last Edit: October 04, 2021, 02:38:17 PM by Wompus Cat » Logged

EVERYTHING TO EXCESS !
MODERATION IS FOR MONKS
jgp12000
Firearms Group
Member
**
Online Online

Posts: 267


« Reply #23 on: October 07, 2021, 03:14:56 PM »

I like that reel Henry, is it solid brass? What brand is it?
Logged
Wompus Cat
ENTREMANURE DAS GROSEN
Sensei
Member
***
Offline Offline

Posts: 943


REEL WHISPERER


WWW
« Reply #24 on: October 07, 2021, 06:13:38 PM »

I like that reel Henry, is it solid brass? What brand is it?

Actually those are 2 Different Reels . Look Closely at the Spool on the top one .
The top one is a Smooth Caster Model 600 by Betts and Bodeus and is all Aluminum .
Notice the Spool is designed so the line will move back and forth as you wind it by built in Wings so to Speak that angle .
The Second Reel is a Long-Cast  made by Spiral Wind and has a Unique Ratchetting mechanism inside that moves the line in one direction then Reverses and goes in the other direction doing basically the same as the Worm Gear system but with a simpler principle .  It is built with similar materials as the Pfluegers .

The Bett was made in the 50's and the Spiral Wind in the 30's Pretty Cool deals .
« Last Edit: October 07, 2021, 06:31:20 PM by Wompus Cat » Logged

EVERYTHING TO EXCESS !
MODERATION IS FOR MONKS
jgp12000
Firearms Group
Member
**
Online Online

Posts: 267


« Reply #25 on: October 07, 2021, 07:31:41 PM »

Those are winches,probably last forever!
Logged
jgp12000
Firearms Group
Member
**
Online Online

Posts: 267


« Reply #26 on: October 07, 2021, 07:43:00 PM »

I put a caliper on the pawl today,Diameter=4.97 mm/.1 960" Height=9.29 mm/.3 660" One ear was shorter at
9.20 mm which causes the pawl to get stuck on the opposite end of the worm when it is installed 180 degrees.If anyone knows of a same size pawl from another manufacturer please post?


* 20211007_143545.jpg (2029.86 KB, 3264x1504 - viewed 7 times.)

* 20211007_143250.jpg (1998.55 KB, 3264x1504 - viewed 7 times.)
« Last Edit: October 07, 2021, 07:51:16 PM by jgp12000 » Logged
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.065 seconds with 20 queries.