alan tani @ alantani.com fishing reel repair rebuild tutorial 50 TW Loud when Reeling
Reel Repair by Alan Tani
September 18, 2021, 07:49:47 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: 50 TW Loud when Reeling  (Read 164 times)
0 Members and 2 Guests are viewing this topic.
jdupree
Member
*
Offline Offline

Posts: 8


« on: September 03, 2021, 03:21:17 PM »

I just serivced 4 International II 50 TW's.  After completion, 2 of them are much louder when reeling than the other 2??(they were that way before I even serviced them, and yes the clickers are off).  The bearings feel great and everything looks great with the 2 in question.  Is this just the "nature of the beast" with these reels?  I can't think of anything that I did differently with the 2 that are louder.  The 2 louder ones appear to be functioning perfectly from what I can tell. 

Any tips on what I might check would be appreciated.

Thanks.
Logged
handi2
Sensei
Member
***
Online Online

Posts: 3671


OCD Reel Service and Repair


« Reply #1 on: September 03, 2021, 03:27:51 PM »

Is it the anti reverse dogs that are louder on the reels in question? You can tweak them a little and use a heavy grease.
Logged

OCD Reel Service & Repair
Gulf Breeze, FL
jdupree
Member
*
Offline Offline

Posts: 8


« Reply #2 on: September 03, 2021, 03:34:16 PM »

That is where it souds like to me its coming from the left side plate.  I guess as you spin the reel, those dogs click?  I did remove them, cleaned them,  and added new grease.  Maybe I need more??
« Last Edit: September 03, 2021, 03:39:11 PM by jdupree » Logged
Wompus Cat
ENTREMANURE DAS GROSEN
Sensei
Member
***
Online Online

Posts: 849


REEL WHISPERER


WWW
« Reply #3 on: September 03, 2021, 04:03:57 PM »

Bout all it can be are the Bearings . I know you say they Feel Good however when you put it all together and have the Spool in it they will make noise .
Logged

EVERYTHING TO EXCESS !
MODERATION IS FOR MONKS
handi2
Sensei
Member
***
Online Online

Posts: 3671


OCD Reel Service and Repair


« Reply #4 on: September 03, 2021, 04:11:50 PM »

That is where it souds like to me its coming from the left side plate.  I guess as you spin the reel, those dogs click?  I did remove them, cleaned them,  and added new grease.  Maybe I need more??

Yes they click anytime the spool turns. You can try Evinrude Triple Guard Grease.

Keith
Logged

OCD Reel Service & Repair
Gulf Breeze, FL
jdupree
Member
*
Offline Offline

Posts: 8


« Reply #5 on: September 03, 2021, 04:17:23 PM »

That is where it souds like to me its coming from the left side plate.  I guess as you spin the reel, those dogs click?  I did remove them, cleaned them,  and added new grease.  Maybe I need more??

Yes they click anytime the spool turns. You can try Evinrude Triple Guard Grease.

Keith

Thanks Keith.
Logged
Wompus Cat
ENTREMANURE DAS GROSEN
Sensei
Member
***
Online Online

Posts: 849


REEL WHISPERER


WWW
« Reply #6 on: September 03, 2021, 04:33:08 PM »

I thought the A/R was on the Right side on those ?  Roll Eyes

Learn something every day .
Logged

EVERYTHING TO EXCESS !
MODERATION IS FOR MONKS
jdupree
Member
*
Offline Offline

Posts: 8


« Reply #7 on: September 03, 2021, 06:21:34 PM »

I thought the A/R was on the Right side on those ?  Roll Eyes

Learn something every day .

Yeah, they are on the left side plate and that is where the load clicking is coming from.  I had one bearing out of the 4 reels that was a little rough so I replaced it.

I will do as Keith suggested and put a little more grease and go with it.
Logged
Wompus Cat
ENTREMANURE DAS GROSEN
Sensei
Member
***
Online Online

Posts: 849


REEL WHISPERER


WWW
« Reply #8 on: September 03, 2021, 09:50:31 PM »

I thought the A/R was on the Right side on those ?  Roll Eyes

Learn something every day .

Yeah, they are on the left side plate and that is where the load clicking is coming from.  I had one bearing out of the 4 reels that was a little rough so I replaced it.

I will do as Keith suggested and put a little more grease and go with it.



I knew where the A/R was  Grin  

The Bearings when either Bad or going will Resonate through the Reel and can sound off anywhere making you think all kinds of maladies. Dogs don't click when Reel is in Free Spool or Line  Out  . So if you have other noises in Free Spool  I would suspect Bearings.  Cramming too much Grease in there to alieve your Click or tone it down could  mess up the A/R in cold weather ......just saying
« Last Edit: September 03, 2021, 09:52:38 PM by Wompus Cat » Logged

EVERYTHING TO EXCESS !
MODERATION IS FOR MONKS
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.061 seconds with 20 queries.