alan tani @ alantani.com fishing reel repair rebuild tutorial Penn 6/0 Clicker Button & Shaft from Donnyboat Nov.15, 2021
Reel Repair by Alan Tani
December 06, 2021, 02:00:05 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Penn 6/0 Clicker Button & Shaft from Donnyboat Nov.15, 2021  (Read 208 times)
0 Members and 1 Guest are viewing this topic.
El Pescador
Firearms Group
Member
**
Online Online

Posts: 1438


San Mateo, California


« on: November 15, 2021, 12:50:59 PM »

Hi Wayne,

could you please post this pic on the forum for me, it is a clicker button & shaft, from a Penn Senator 6/0,

I have never seen one of these shafts manufactured like this before, or is it excessive wear, the clicker tongue, is not too bad,

as far as ware goes, although the reel did have a lot of sand in it,

cheers, Don.



And I did enlarge the photo for this detailed shot, Enjoy.



Posting for Don in Western AU,

Wayne
Logged

Never let the skinny guys make the sandwiches!!
Donnyboat
donnyboat
Photo Group
Member
**
Online Online

Posts: 2576


« Reply #1 on: November 15, 2021, 01:09:32 PM »

Thanks a million Wayne, its out of a red Senator 6/0 114H the model with the adgustment screw on the tail plate bearing if that helps, cheers Don.
Logged

Don, or donnyboat
RowdyW
Firearms Group
Member
**
Online Online

Posts: 3110



« Reply #2 on: November 15, 2021, 01:57:09 PM »

That looks just plain worn out. Probably the only lubrication  it had was sand & saltwater.  Grin
Logged
Gfish
Gfish
Member
*
Offline Offline

Posts: 3591


What? Me worry?


« Reply #3 on: November 15, 2021, 03:18:06 PM »

Whoa! It’s so even looking like it coulda been modified that way.
Logged

Fishing tackle is an art form and all fish caught on the right tackle are"Gfish"!
Donnyboat
donnyboat
Photo Group
Member
**
Online Online

Posts: 2576


« Reply #4 on: November 16, 2021, 12:41:42 AM »

Thanks Rudy & Greg, yes it is very even, thats what made me ask the question, I broke three screws of in the posts, two of them had a bit of metal protruding out, so I soaked them in auto transmission fluid & acetone 50/50, managed to cut a groove in the protruding screw, with the dremmel, applied a bit of heat, they came out, now I have to try & drill the other broken screw out, I have some left hand drill bits, but the chuck on the drill comes undone, when I use it  in reverse, I did manage to find a couple of old posts, they look a bit rough, but will have to do, if required, its not my reel either, thanks again Wayne, that was a great job, of enlarging that picture, cheers Don.
Logged

Don, or donnyboat
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.194 seconds with 20 queries.