Senator 114 H

Started by Donnyboat, November 16, 2021, 01:29:55 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Donnyboat

I`m surching for the measurement of the bearings in the tail plate of a Special 6/0 Senator Penn 114 H, imperial & metric equivalent please, if anyone can help, I have done a fair bit of reading, on bearings here but cant find these mesurement thank , cheers Don.
Don, or donnyboat

Wompus Cat

#1
My Verneirs say .18 hole x .20 thick x.49 Circum.  Thousandths
and 4.6 hole x .48 thick x 12.6 circumfrence in MM's

The Bearing manufactures say
3/16x1/2x49




If a Grass Hopper Carried a Shotgun then the Birds wouldn't MESS with Him

RowdyW

I believe you mean diameter instead of circum.    ;D

Wompus Cat

Quote from: RowdyW on November 16, 2021, 04:32:15 PM
I believe you mean diameter instead of circum.    ;D

Well only one cup o Joe   when I posted that  ::)
Thanks
If a Grass Hopper Carried a Shotgun then the Birds wouldn't MESS with Him

Donnyboat

Thanks very much Billy, cheers Don.
Don, or donnyboat