Okuma V 80a anti reverse

Started by locknut, August 10, 2012, 04:15:27 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

locknut

Gidday guys and  greetings for cold wet New Zealand. I have an Okuma v 80 reel that the anti reverse sometimes fails. Normaly at the worst possibe time. I could probably spend an hour trying to find the correct tutoral and still not find it. If someone could point me in the right direction that would be great. I have the reel parts list but none are labeled  "anti-reverse bearing". Anyway the reel is in bits but knowing which bearing is the problem would be great.
Many thanks
Jeremy

redsetta

G'day Jeremy,
Schematic here: https://www.okumafishing.com/assets/schematics/Spinning%20Reels/Vsystem-V-80a.pdf
The AR bearing is part 910-1.
Give it a good clean and make sure it's free of grease.
If it still plays up, best replace it...
The V-80 is reasonably similar to the Salina, which Mark did a quick tutorial on here: http://alantani.com/index.php?topic=2675.0
Let us know how you get on.
Good luck, Justin
Fortitudine vincimus - By endurance we conquer

locknut