alan tani @ alantani.com fishing reel repair rebuild tutorial bearing dimensions
Reel Repair by Alan Tani
October 17, 2019, 12:41:43 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: bearing dimensions  (Read 5172 times)
0 Members and 1 Guest are viewing this topic.
alantani
admin
Administrator
Member
*****
Offline Offline

Posts: 17740



« on: July 13, 2009, 10:01:32 AM »

a friend requests a large order of bearings for the accurates used by his charter operation, so i though i'd post the dimensions.

accurate single and two speed boss reels (not the extremes)

left side plate - 0.187 x 0.5 x 0.195 inch
left and right spool - 0.187 x 0.5 x 0.195 inch
right side plate - 7 x 17 x 5 mm
preset knob bearing - 0.187 x 0.5 x 0.195 inch

accurate atd 6 and 12

left side plate - 8 x 14 x 4 mm
left and right spool - 8 x 14 x 4 mm
right side plate - 9 x 20 x 6 mm
inner and outer handle shaft - 12 x 18 x 4 mm
preset knob bearing - 7 x 14 x 5 mm
Logged

send me an email at alantani@yahoo.com for questions!
steelfish
the Baja Guy
Sensei
Member
***
Online Online

Posts: 3184


Sea of Cortez


« Reply #1 on: September 24, 2019, 08:47:04 AM »




accurate two speed Valiant 400 reels

left side plate -              0.187 x 0.5 x 0.195 inch
left and right spool -      0.187 x 0.5 x 0.195 inch
right side plate -                          7 x 17 x 5 mm
preset knob bearing -    0.187 x 0.5 x 0.195 inch
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.232 seconds with 18 queries.