alan tani @ alantani.com fishing reel repair rebuild tutorial Daiwa Sealine 600H Rebuild and Upgrade
Reel Repair by Alan Tani
December 15, 2019, 12:48:04 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 2 3 [4]   Go Down
  Print  
Author Topic: Daiwa Sealine 600H Rebuild and Upgrade  (Read 35876 times)
0 Members and 1 Guest are viewing this topic.
Rothmar2
Sensei
Member
***
Online Online

Posts: 633


« Reply #45 on: October 19, 2018, 11:17:10 AM »

Try Contacting Bryan at......

http://alantani.com/index.php?topic=12058.0

Hope he still has a kit in stock for you.
« Last Edit: October 20, 2018, 10:06:29 PM by Rothmar2 » Logged
Roller
Member
*
Offline Offline

Posts: 7


« Reply #46 on: October 19, 2018, 03:41:05 PM »

Try Contacting Bryan about....

http://alantani.com/index.php?topic=7972.0

Hope he still has a kit in stock for you.


Thanks, just wondering could i just add carbontex washers? Or to get a better drag system do i need to replace the metal washers etc  as well?
« Last Edit: October 19, 2018, 03:47:46 PM by Roller » Logged
Rothmar2
Sensei
Member
***
Online Online

Posts: 633


« Reply #47 on: October 19, 2018, 03:59:42 PM »

You could, but it would depend on what drag washers are currently in there. The stock Daiwa drag washers were quite thick, sometimes 2x+ thicker than the carbontex washers you will be replacing the stock ones with. You will then have a problem with the spacer sleeve under the star now being too short, and the star may rub against the side plate before you get any meaningful drag tension. You might have add one or more extra metal washers on top of your modified stack to get it back to an acceptable overall height.
Bryan’s kit will be a direct swap out, and call it done. But if you have the tools, materials and time to modify other washers to suit, there is nothing stopping you from building your own custom metal stack to suit the carbontex upgrade. I have done this on Penns and Daiwa’s with mixed results. The quickest and easiest solution is to invest in Bryan’s kit. These reels are worth the investment IMO, as properly cared for, you will be able to hand these reels down to your children. It’s a shame Daiwa don’t build reels as robust as this series any more.
Logged
ez2cdave
Sensei
Member
***
Offline Offline

Posts: 1251



« Reply #48 on: October 19, 2018, 06:23:47 PM »

For the "How-To" on the Carbon drag . . .

See Post #1 in this thread http://alantani.com/index.php?topic=4783.0 . . . 

AND this thread http://alantani.com/index.php?topic=8.0,

Tight Lines !
Logged
Roller
Member
*
Offline Offline

Posts: 7


« Reply #49 on: October 20, 2018, 03:52:59 AM »

Many thanks guys..
Logged
Pages: 1 2 3 [4]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.189 seconds with 17 queries.