alan tani @ alantani.com fishing reel repair rebuild tutorial Okuma V 80a anti reverse
Reel Repair by Alan Tani
October 16, 2019, 09:30:42 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Okuma V 80a anti reverse  (Read 2545 times)
0 Members and 1 Guest are viewing this topic.
locknut
Firearms Group
Member
**
Offline Offline

Posts: 85


Auckland, New Zealand


« on: August 09, 2012, 08:15:27 PM »

Gidday guys and  greetings for cold wet New Zealand. I have an Okuma v 80 reel that the anti reverse sometimes fails. Normaly at the worst possibe time. I could probably spend an hour trying to find the correct tutoral and still not find it. If someone could point me in the right direction that would be great. I have the reel parts list but none are labeled  "anti-reverse bearing". Anyway the reel is in bits but knowing which bearing is the problem would be great.
Many thanks
Jeremy
Logged
redsetta
Moderator
Member
****
Offline Offline

Posts: 2735


Auckland, New Zealand


« Reply #1 on: August 11, 2012, 06:13:30 PM »

G'day Jeremy,
Schematic here: https://www.okumafishing.com/assets/schematics/Spinning%20Reels/Vsystem-V-80a.pdf
The AR bearing is part 910-1.
Give it a good clean and make sure it's free of grease.
If it still plays up, best replace it...
The V-80 is reasonably similar to the Salina, which Mark did a quick tutorial on here: http://alantani.com/index.php?topic=2675.0
Let us know how you get on.
Good luck, Justin
Logged

Fortitudine vincimus - By endurance we conquer
locknut
Firearms Group
Member
**
Offline Offline

Posts: 85


Auckland, New Zealand


« Reply #2 on: August 12, 2012, 10:30:07 AM »

Thanks a lot Justin
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.204 seconds with 17 queries.