daiwa pluton 200shl

Started by try to fish, December 09, 2009, 12:56:09 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

try to fish

hi,

have recently bought one of these reel.took it apart and happy to see that they do comes with 3 carbon fibre drag washer.happy with that and go ahead and swapped out the plastic washer below the main gear.try out with one piece of cf washer and put everything back.............drag seems to be very week so open it up and add another piece of cf washer under the main gear and seems to get more than i expected.is this type of setup allright for jigging?.

alantani

it should be fine for that application, but it's a pretty small reel.  how much drag are you getting now?  and the drags were greased already, right?  alan
send me an email at alantani@yahoo.com for questions!

try to fish

hi alan,

yes,all washer have already been greased and in regards of the drag..........even before its fully  locked it up i couldnt even turn the handle without the spool spin or cant pull any line out without the risk of causing injuries to my fingers.

alantani

i think you've got it!  now for an on the water trial.  alan
send me an email at alantani@yahoo.com for questions!