Ceramic versus SS Bearings

[Dave Bentley]

Hi Alan,
Checked your site and haven't found your thoughts on the above.
I am about to rebuilt my '91 ABU 7000 and will replace the bushes with bearings but not sure which ones.

Your input would be appreciated.

Dave

[alantani]

save your money.  remove the shields on your stock abec 5 bearings, clean them out with carb cleaner and compressed air, lube them with xtreme reel +, reinstall them open you're all set.  also, clean out the levelwind assembly in the same matter.  it's gonna spin forever!

http://alantani.com/index.php?topic=13.0

http://alantani.com/index.php?topic=50.0

http://alantani.com/index.php?topic=220.0