alan tani @ alantani.com fishing reel repair rebuild tutorial Newell 200/300/400Series,Penn112H&Jigmasters,&ProGear 255/251 5+1Drag - $29
Reel Repair by Alan Tani
September 18, 2019, 10:26:22 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 ... 6 7 8 9 10 [11] 12 13 14 15 16   Go Down
  Print  
Author Topic: Newell 200/300/400Series,Penn112H&Jigmasters,&ProGear 255/251 5+1Drag - $29  (Read 121549 times)
0 Members and 3 Guests are viewing this topic.
Hoochrip
Member
*
Offline Offline

Posts: 48


« Reply #150 on: February 16, 2016, 04:15:18 PM »

Bryan,
Looking for a fine thread 1st or 2nd gen jigmaster ss gear sleeve, gen 2 perfered, would you have one? Also, 5+1 drag set plus any other washers needed for gen 2 if you can find one and a ss dog. I can do PayPal.
Thanks,
Mark
« Last Edit: February 16, 2016, 04:18:00 PM by Hoochrip » Logged
steelhead_killer
Member
*
Online Online

Posts: 875


Andy


WWW
« Reply #151 on: February 21, 2016, 10:11:37 AM »

Bryan this is the drag configuration in my Newell 332-5.  Does the 5+1 work?  Also I read that a delrin washer under the main gear is the way to smooth out the drag range without sacrificing top end drag results.  Does this match your results?  If so, where to you get them?

Thanks!
Logged

><)))">
Newell Nut
Firearms Group
Member
**
Online Online

Posts: 2410



« Reply #152 on: February 21, 2016, 12:38:45 PM »

Andy

That drag stack is not right. What you need for an upgrade is Bryan's 5 stack drag kit including the Belleville. PM me your address and I can send to you the delrin washers. You can use a .030 Delrin under the gear and usually the .020 under the Belleville and it will all bolt to the side plate okay. Using the wider Newell Belleville may bind up on you.

Buy the kit directly from Bryan.

Dwight
Logged
Sharkin904
Member
*
Offline Offline

Posts: 131



« Reply #153 on: February 21, 2016, 01:01:53 PM »

Are these still in production?
Logged
Alto Mare
Moderator
Member
****
Online Online

Posts: 12525


Southeastern Pennsylvania


« Reply #154 on: February 21, 2016, 02:57:26 PM »

Bryan this is the drag configuration in my Newell 332-5.  Does the 5+1 work?  Also I read that a delrin washer under the main gear is the way to smooth out the drag range without sacrificing top end drag results.  Does this match your results?  If so, where to you get them?

Thanks!

Here is a shot of the best layout for my jigmasters , it should work in your newell as well.


As Newell Nut mentioned .30 Delrin for under the gear ( 5 ) .50mm carbon fiber washers and  ( 5 ) metal washers...Bryan's kit. I do replace the keyed washer on top, with a thicker stock keyed washer.
The belleville on top is also Delrin, here is where I get it from...very reasonable in cost:
http://www.mcmaster.com/#3573a17/=1185qgf

Sal
« Last Edit: February 21, 2016, 03:06:47 PM by Alto Mare » Logged

Forget about all the reasons why something may not work. You only need to find one good reason why it will.
steelhead_killer
Member
*
Online Online

Posts: 875


Andy


WWW
« Reply #155 on: February 21, 2016, 03:08:23 PM »

Thanks Sal!
Logged

><)))">
Alto Mare
Moderator
Member
****
Online Online

Posts: 12525


Southeastern Pennsylvania


« Reply #156 on: February 21, 2016, 03:19:07 PM »

To me the metal Belleville on top is too stiff, drags on all my star reels start very softly, even the larger reels. This layout as I'm showing helps it.
Logged

Forget about all the reasons why something may not work. You only need to find one good reason why it will.
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10232


The Reel Whisperer


« Reply #157 on: February 21, 2016, 03:47:26 PM »

Are these still in production?
Yes, I still have these kits available.  Please send me a PM with the number of kits you will need and I'll send you a paypal invoice for the purchase of the drag kits.

Thank you,
Bryan
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
steelhead_killer
Member
*
Online Online

Posts: 875


Andy


WWW
« Reply #158 on: March 01, 2016, 03:28:56 PM »

Installed your 5+1 kit with Delrin under the main and below the belville and this drag is super strong and smooooooooth!  Thanks Bryan!  I may try the Delrin Belville next...
Logged

><)))">
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10232


The Reel Whisperer


« Reply #159 on: March 01, 2016, 03:49:10 PM »

Killer!!!
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
broadway
Sensei
Member
***
Online Online

Posts: 3121


Broadway Dom, New York City


« Reply #160 on: March 01, 2016, 06:53:27 PM »

Hey Sal,
   I'm not a Newell guy, but was wondering if you do the same for Senators and other Penn reels.  If so, what size do you recommend for the 112h and 113h?
Thanks for bringing these to our attention
Dom
Logged
Alto Mare
Moderator
Member
****
Online Online

Posts: 12525


Southeastern Pennsylvania


« Reply #161 on: March 01, 2016, 10:02:23 PM »

Hey Sal,
   I'm not a Newell guy, but was wondering if you do the same for Senators and other Penn reels.  If so, what size do you recommend for the 112h and 113h?
Thanks for bringing these to our attention
Dom
Hey Dom,
Here is what I use and yes, I do recommend them:
http://www.mcmaster.com/#3573a17/=11cxp2c
Sizes are very limited on those, for the 112H they drop right in.
For the 113H, you will need to enlarge the hole by 1/16".
For the Squidder size, you will need to reduce the Outer Diameter by 1/8".
I use Delrin washers on all my reels.
A very knowledgeable member mentioned that the washer above  might get too hot, this one will need to be tested on the water, my tests here are limited.

The Delrin for under the gear has been doing great, I've gradually been getting reports from members about it.
The larger reels get a flat Delrin and not as I'm showing above. That washer could sit right under the top-hat, if the reel doesn't come with a top-hat, it would sit under the last metal washer on the very top.

Sal
Logged

Forget about all the reasons why something may not work. You only need to find one good reason why it will.
broadway
Sensei
Member
***
Online Online

Posts: 3121


Broadway Dom, New York City


« Reply #162 on: March 01, 2016, 11:46:11 PM »

That's great Sal... I will have to pick a few up for the 112h's and test them in the spring.
I appreciate it,
Dom
Logged
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
****
Online Online

Posts: 10232


The Reel Whisperer


« Reply #163 on: March 04, 2016, 03:33:53 PM »

Hi Joe,

I'll send you a PayPal invoice when I get back home.
Thank you,
Bryan
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
daddyhoit
Member
*
Offline Offline

Posts: 9


« Reply #164 on: March 06, 2016, 11:44:45 AM »

I could use 2 sets of these!
Logged
Pages: 1 ... 6 7 8 9 10 [11] 12 13 14 15 16   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.236 seconds with 17 queries.