alan tani @ alantani.com fishing reel repair rebuild tutorial sealine 400/450h
Reel Repair by Alan Tani
August 25, 2019, 08:17:53 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: sealine 400/450h  (Read 30813 times)
0 Members and 7 Guests are viewing this topic.
Caseymcv
Member
*
Offline Offline

Posts: 10


« Reply #15 on: April 24, 2017, 09:58:31 AM »

Where can I get the oversized handle for the Sealine 400?
Logged
Porthos
Member
*
Online Online

Posts: 650



« Reply #16 on: April 24, 2017, 11:00:09 AM »

Where can I get the oversized handle for the Sealine 400?

From Alan directly:
http://alantani.com/index.php?topic=12785.0
Logged
ez2cdave
Sensei
Member
***
Offline Offline

Posts: 1173



« Reply #17 on: August 31, 2017, 10:34:22 AM »

Here is Alan's excellent tutorial on the DAIWA SEALINE H 400H / 450H reel in PDF form for easy download ( Below ) . . . ENJOY !

Tight Lines !

* DAIWA SEALINE 400H and 450H.pdf (3054 KB - downloaded 194 times.)
Logged
Recoil Rob
Member
*
Offline Offline

Posts: 119



« Reply #18 on: May 20, 2019, 06:28:15 PM »

Seems when I tear down a reel there are always extra parts on the shaft. My 450 has a small spacer, perhaps 1/8" tall,  between the 2 tension washers on the shaft.
Logged
RowdyW
Firearms Group
Member
**
Online Online

Posts: 2409



« Reply #19 on: May 20, 2019, 06:39:16 PM »

That's the way the manufacturer puts them together. If you think they are extra parts then take them out & toss them away. You'll probably regret it though.      Rudy
« Last Edit: May 20, 2019, 06:45:02 PM by RowdyW » Logged
Recoil Rob
Member
*
Offline Offline

Posts: 119



« Reply #20 on: May 20, 2019, 07:00:41 PM »

Yeah, I know they put it there, so why isn't it on the schematic?

I see the same stuff with Newells, they drew a schematic and decided to go off the reservation, throw in a few extra parts that aren't on the diagram.

Logged
RowdyW
Firearms Group
Member
**
Online Online

Posts: 2409



« Reply #21 on: May 20, 2019, 07:45:22 PM »

Sometimes washers, spacers, etc. are added or subtracted because of machining tolerances and wear. Learn why it is the way it is before thinking something is wrong.
Logged
Recoil Rob
Member
*
Offline Offline

Posts: 119



« Reply #22 on: May 21, 2019, 02:56:51 PM »

Well it was my mistake. This reel had been set up with one of those Aftco Starset drag limiters, the small spacer I found was part of that setup, not put there by Daiwa. Mea culpa.

I'll stick by the Newell comment though, I have 3 Newells I bought new and only one was setup like the schematic. If machining tolerances are off because of wear fix the machining.

Logged
Darkhorse
Firearms Group
Member
**
Offline Offline

Posts: 15


« Reply #23 on: May 30, 2019, 09:13:48 AM »

I wish the anti reverse mechanism was shown in detail. Years ago I fished the Diawa Sealine reels in King Mackeral tournaments on the east coast. I had 2 450 or 450H's, I can't remember exactly, and a 450H Anti Backlash with a magnetic cast control, plus a couple of larger ones I used for bottom fishing, and on a downrigger. In the spread I also fished a Diawa Silver spinning reel in the 9000C size. My problem is after we sold the boat these reels were put up for a few years. When I checked them out all but 2 had no anti reverse, now it's just one.
So I would like to see the details about the anti reverse as I want to restore these old reels.
Logged
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.202 seconds with 17 queries.