bearing packer (mm and inch), adaptor and needle kit - back in stock 7/23/2020

Started by alantani, April 07, 2010, 05:49:51 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

alantani

send me an email at alantani@yahoo.com for questions!

scarpie


alantani

send me an email at alantani@yahoo.com for questions!

scarpie

Quote from: scarpie on November 25, 2018, 11:13:08 PM
Hi Alan,

I just PM'd you a request.
Cheers, Chris

Thank you Alan, arrived quicker than I thought and quickly got into playing with it.  Mixed Corrosion X grease with Corrosion X oil and messily half filled the grease gun.  A few messy fills later, I was able to validate the packing by removing the shields to find the grease well packed inside. I'm going to have to find an adapter to convert the converter to fit the needle to my gun nozzle. 

joe k


alantani

send me an email at alantani@yahoo.com for questions!

Tiddlerbasher

Joe you will nor regret buying these. I bought a pair eons ago. They are beautifully machined and bearings fit precisely. If you worry about removing shields, to grease a bearing, worry no more. These will push out the old grease and fill with new without removing the shields. Although I still flush with solvent. I screw my small grease gun directly into the packer (use ptfe tape). One of the best specialised tools I have ever bought - thank you Alan (oh and your machinist :D).



ReelFishingProblems

Alan,

Are you going to do another batch of these to sell?

Too keep myself busy in isolation I figured I would repack every bearing I can find, even if it isn't for fishing!
I waited too long to get one of your bearing packers it seems.

Hope all is well with you and the family

Nick

alantani

nick, i looked around for a second used set but couldn't find it.  unless ron remembers where it is, i'll have to have a talk with either cortez conversions or another shop about making another run.  it's just hard to tie up so much money all at once.  stay tuned.......   :-\
send me an email at alantani@yahoo.com for questions!

ReelFishingProblems

Alan,

Nothin else to do but wait. Plenty to keep busy with.

If you make another run in the future I will definitely get one

Nick

edgarz

Quote from: alantani on April 17, 2020, 03:13:04 PM
nick, i looked around for a second used set but couldn't find it.  unless ron remembers where it is, i'll have to have a talk with either cortez conversions or another shop about making another run.  it's just hard to tie up so much money all at once.  stay tuned.......   :-\

Looking forward to this Alan.

Rocket Dog


Ron Jones

Alan,
I think I took the last half of the kit, we couldn't find the metric piece.
Ron Jones
Ronald Jones
To those who have gone to sea and returned and to those who have gone to sea and will never return
"

rogan