TANK 3D

[erikpowell]

Great job Bob! I think the series2 side plate is a cool addition.

wasn't that the scoreboard stumper from a month or so ago?   i didn't even notice the tuna.

it's already monday morning here... so I gotta get to work now

[Topshot]

Where did you get the handle...not the knob, but the handle itself?

You can order those from keta (lee). He's the one who makes them

[BMITCH]

Great job Bob! I think the series2 side plate is a cool addition.

wasn't that the scoreboard stumper from a month or so ago?   i didn't even notice the tuna.

it's already monday morning here... so I gotta get to work now

Erik, last months stumper was a little more difficult. That was a 114H with full frame that normally has 5 screws for the side plate. I drilled and tapped the three additional screw holes. This is all cosmetic stuff that I'm doing. Again it's all good and fun!
Bob

[BMITCH]

Pompano joe, yes those come from Lee(Keta) they are HD. Let's give credit to you also. The 113h Baja harness lugs you posted on another thread. I used those. Only problem was I needed to cut them off to fit the bridge. Thanks for the idea!

[surfcaster]

At risk of my opinion being discredited by a moderator Nice reel!

[BMITCH]

Thanks surfcaster. I think I'll make the next stumper more difficult

[Shark Hunter]

At risk of my opinion being discredited by a moderator Nice reel!

[Dominick]

Great stuff.  Nice neat work also.

[Shark Hunter]

Bob is movin' on up!
Great work Buddy!

[john2244]

Very nice work !!!

John

[DaBigOno]

Great job Bob!

[Irish Jigger]

Nice work there Bob.
The third dog is well supported with it's locating screw tapped into the frame.
Good thinking.

[BMITCH]

Tom, thanks.! Coming from you that means alot time will tell if that third dog holds up. I know Sal had some concern on this point. It seems robust enough. I wouldn't try this with the standard frame with inner ring though. I think that wouldn't support the third dog screw/pivot point as well. This is getting me thinking on my 114H with the Penn one piece frame that maybe this could be done there also. When I get a free moment I will check it out. I'm trying to find out how to post a video at this point. The sound of the three dogs is really neat!
Bob

[Newell Nut]

Really nice looking project. I like to hear my dogs talking too.

[Chris Gatorfan]

Bob are you running Stainless post. They could stop some of the flex there.