alan tani @ fishing reel repair rebuild tutorial electramate 6/0 gear sleeve
Reel Repair by Alan Tani
December 10, 2019, 03:20:59 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Login Register  
Pages: 1 2 [3]   Go Down
Author Topic: electramate 6/0 gear sleeve  (Read 16887 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 1249

« Reply #30 on: May 17, 2018, 01:21:17 PM »

Greetings, Ohana !

Elec-Tra-Mate makes Stainless Steel Gear Sleeves for several different reels . . .


Stainless Steel Gear Sleeves

Over the years, fishermen have requested faster and more powerful Elec-Tra-MateŽ models.  Today’s Elec-Tra-Mates now have considerably more power than the drag on the reels can handle.  Not realizing the extreme power of the Elec-Tra-MateŽ when large fish are hooked, there is a tendency by the fisherman to continue tightening his drag in an attempt to bring the fish to the boat faster.  When this happens, the Elec-Tra-MateŽ exerts more torque on the threads inside the Brass Gear Sleeve inside the PennŽ Reel than they are designed to handle and they start to strip.  Over a period of time, because of this extreme power, the threads eventually fail, rendering the reel useless.
Brass Gear Sleeve failure often leaves the recreational and commercial fisherman without the use of this Elec-Tra-MateŽ until his PennŽ Reel is repaired.  Seldom is the fisherman given warning of his reels impending failure. At the request of tackle stores who repair these big game reels, and fishermen who use our products, we now offer a stronger replacement Gear Sleeve machined from Solid Stainless Steel to eliminate this problem. The Stainless Steel Gear Sleeve is manufactured entirely in the company's North Carolina factory, and comes with a 90 day parts  warranty against defects in material and workmanship.
98-320SS  - Fits Penn 320 GT2, 330 GTi, 330 GT2, 113H 4/0

98-114SS  - Fits Penn 114,114H, 114HL, 114HLW 6/0 and 115L 9/0

98-116SS  - Fits Penn 116 12/0

98-117SS  - Fits Penn 117 14/0


Tight Lines !
Online Online

Posts: 3425

OCD Reel Service and Repair

« Reply #31 on: May 17, 2018, 01:58:47 PM »

Twice I have found SS gear sleeves with the bottom lubricating hole in the 114H reels. They were probably made by Electramate. I’m only assuming.

I still have them.


* 40F695D8-A3FC-4144-A910-7C77C906166C.jpeg (2276.66 KB, 3264x2448 - viewed 154 times.)
« Last Edit: May 17, 2018, 02:03:08 PM by handi2 » Logged

OCD Reel Service & Repair
Gulf Breeze, FL
Pages: 1 2 [3]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.205 seconds with 17 queries.