Fin-Nor Fly Parts

Started by RamseyReelRepair, March 10, 2019, 02:58:57 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

RamseyReelRepair

Hey guys I just got a Fin-Nor No. 4 fly real and was wondering if anyone could tell me where to get parts and schematics for fly reels. I need a new cork drag washer for this one but i dont even know the part number. I also just received an orvis some others (pictures attached). Anything would be very helpful. Also what do yall charge to work on them and whats your reason for the price (Just Curious)

Thanks

West
Check out the website and gallery!
😎http://www.ramseyreelrepair.com😎

Rothmar2

Re the Fin nor. Have you seen this thread?

https://alantani.com/index.php?topic=17219.0

Not sure how you would go getting parts for these as they have been out of production for quite some time.

As for the Orvis and SA reels, might be an idea to possibly email the distributors for these in your area, if you need parts you might strike it lucky in that parts could still be available.


bill19803

the former   finnor  service manager  still   repairs  reels    with his  stock of parts
i  remember  his  name  as  david  connor   somewhere  in  carolinas
when i  get  a  chance  ill look   for  his  email/address

54bullseye

West
If you measure the thickness of the cork drag you can buy sheets of pressed cork material on the internet in all different thickness. Then just cut out and glue on. There is a tutorial under the Fin-Nor section of this site if you look around.  John Taylor

RamseyReelRepair

Quote from: bill19803 on March 10, 2019, 08:52:50 PM
the former   finnor  service manager  still   repairs  reels    with his  stock of parts
i  remember  his  name  as  david  connor   somewhere  in  carolinas
when i  get  a  chance  ill look   for  his  email/address

I would appreciate that! Thanks

West
Check out the website and gallery!
😎http://www.ramseyreelrepair.com😎