pulling the bearing on a daiwa 30 sha

Started by jamesnashtonbrady, March 16, 2014, 02:19:26 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jamesnashtonbrady

The hell do you pull the bearing out of the left side plate on a daiwa 30 sha? Iv spent all daydand countless calls with no answers on how to get this bearing out.

Hamachi

#1
If it looks like this, remove the Phillips screw and wiggle the plate out of there. On my "x" it just popped straight out. Sometimes the graphite swells trapping the bearing in. Need a pick or homemade bearing puller to pry it out. Make a "L" shaped tool to get under the bearing. Picture taken from Alan's sealine "x" tutorial.
The rail is your friend, no zing pow, on the iron wenches, I like broccoli!

bluefish69

Quote from: Hamachi on March 16, 2014, 04:37:52 AM
If it looks like this, remove the Phillips screw and wiggle the plate out of there. On my "x" it just popped straight out. Sometimes the graphite swells trapping the bearing in. Need a pick or homemade bearing puller to pry it out. Make a "L" shaped tool to get under the bearing. Picture taken from Alan's sealine "x" tutorial.

If it's the same as the 27sh do the above but the Bearing pushes in from the outside of the reel & it has an "O" ring on it. Order a new "O" ring

Mike
I have not failed.  I just found 10,000 ways that won't work.