New Stuff

Started by Dawn, March 20, 2014, 04:59:04 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Dawn

March 20, 2014, 04:59:04 PM
A quick update.

I've got some of Aaron's pin pliers in stock.  Red  http://smoothdrag.com/Spool_Bearing_Pin_Removal_Pliers.html

Handles in gold   http://smoothdrag.com/handles.html

Gear sets  113H & 114H   http://smoothdrag.com/gear_sets.html

The Carbontex size list is updated.  http://smoothdrag.com/Carbontex_washer_sizes_Retail3-2014.pdf

  I've got 349H 5 drag stack KIT, Carbontex and Metal.  Working on Daiwa 400H 5 drag stack, not sure how long on that.  Working on Daiwa Tatula drags, about 3 weeks.

Dawn

Zimbass

#1
March 21, 2014, 07:03:15 AM
Great news Dawn.

Those spool pin pliers look really well made. Will be sure to buy a pair with my next order. Sure you must be getting busy with so many products  8)
Never was so much owed by so many to so few.

Dominick

#2
March 21, 2014, 11:42:06 PM
Dawn very nice.  I also like the new look of the site.  Dominick
Leave the gun.  Take the cannolis.

There are two things I don't like about fishing.  Getting up early in the morning and boats.  The rest of it is fun.

OldSchool

#3
March 23, 2014, 04:31:27 PM
The kits you do save $$$ in postage costs and convenience all being all in one place.

alantani

#4
March 24, 2014, 02:56:48 AM
very nice!  i will figure out the gear sleeve availability for you. 
send me an email at alantani@yahoo.com for questions!

joe k

#5
April 28, 2014, 02:43:10 PM
Hello there ..r there carbontex washer available 4 the levelmatic series..i have doubles of 910,20,30,40,...did not want to use the old #140 I have hanging around..maybe I did not see on washer list price sheet..joe

Dawn

#6
April 28, 2014, 04:23:20 PM
The Penn 140 is close, but not quite for those reels.  I believe this washers works:   20.65mm x 8.90

Dawn
Dawn

joe k

#7
April 28, 2014, 11:13:01 PM
Dawn....my fault,,,I have smoothie #140 grag kits...Not reel.....Is carbontex available 4 the levelmatic series...

Dawn

#8
April 30, 2014, 03:57:07 PM
Yes, I think this is for the levelmatic:   20.65mm x 8.90
Dawn

Richardr

#9
April 30, 2014, 07:13:20 PM
Quote from: Dawn on March 20, 2014, 04:59:04 PM
A quick update.

I've got some of Aaron's pin pliers in stock.  Red  http://smoothdrag.com/Spool_Bearing_Pin_Removal_Pliers.html

Handles in gold   http://smoothdrag.com/handles.html

Gear sets  113H & 114H   http://smoothdrag.com/gear_sets.html

The Carbontex size list is updated.  http://smoothdrag.com/Carbontex_washer_sizes_Retail3-2014.pdf

  I've got 349H 5 drag stack KIT, Carbontex and Metal.  Working on Daiwa 400H 5 drag stack, not sure how long on that.  Working on Daiwa Tatula drags, about 3 weeks.



Dawn,
Regarding the Spool Bearing Pin Pliers, will it work with both low profile baitcasters (lexa 300, revo toro, curado 300) and "larger" inshore/"midshore" conventionals (sizes like Shimano Talica 8-16, Tekota 600LC, etc).
I'm looking for a general purpose bearing pin plier. I've glanced at the Hedgehog tool but seems a bit fragile and not capable of handling most reels, please advice.
Thanks
Richard (btw, great with Tsi321)
Print
Go Up Pages1
User actions