Under Gear Sleeve Shims

[handi2]

Hello,

I need some shims that fit under the gear sleeve for the Penn 113H and 114H reel. If you know where they are available please let me know.

Thank you,

Keith Rawson

[Alto Mare]

Here you go Keith:
http://www.mcmaster.com/#90902A221
Those will work for the 113H's

and these for the 114H's
http://www.mcmaster.com/#90902A223

Sal

[steelfish]

which other place I can get shims for the 113h?

for some reason MacMaster dont accept my visa C.Card, only US visa (1st time happening)
searched ebay with no luck.

also, how hard is to take the sleeve out, any tips before screw something there.

[johndtuttle]

which other place I can get shims for the 113h?

for some reason MacMaster dont accept my visa C.Card, only US visa (1st time happening)
searched ebay with no luck.

also, how hard is to take the sleeve out, any tips before screw something there.

Its super simple. To remove the gear sleeve you punch out a keeper pin you will see. Usually just a few taps and they come right out.

[handi2]

Here you go Keith:
http://www.mcmaster.com/#90902A221
Those will work for the 113H's

and these for the 114H's
http://www.mcmaster.com/#90902A223

Sal

Thanks Sal,

I know this was a year ago when I asked and you responded I just got some Friday.

Thanks

[Alto Mare]

Never a problem Keith.

Sal