TLD15/30S clutch lever binding

[indoman]

After putting mine back together the clutch lever will engage/ disengage once then binds up and won't move.    I pulled the cover and tried to move the yoke plate.  It seemed that the grease under it was almost creating suction and not letting it slide easily enough?  Any ideas?

Thanks. 

[Bryan Young]

Add a drop of Corrosion-X or similar to that grease.

[basto]

I think you might need to pull it apart and put it back together again.

[indoman]

Will try that Bryan. Thx

[indoman]

That worked Bryan.   Thanks!