Penn 525 IAR/ARB

[jaypeegee]

Hi

I have a second hand Mag extra en route.
I have googled the size and specs of the ARB in the right hand plate looking to see what options are available for replacement as I suspect this may be on its last legs

Does anyone know the specs or SKU of this bearing?

Part # 98B-525 Bearing, Anti-Reverse Clutch Bearing

If I can find the SKU/Specs and source one locally it will be faster and hopefully cheaper than buying O/seas.




Thanks

[cwillis85]

Here it is at scott's, https://www.mysticparts.com/PennParts/Parts/98B-525.aspx

[jaypeegee]

Hi
I sourced the SKU from that page
I want the dimensions so I can see if alternates exist from somewhere in NZ or Boca etc

[cwillis85]

Oh sorry. I have a squall 15, which I believe has the same bearing but I wouldn't know where to begin measuring it for you.

[alantani]

boca bearings should have the ar bearing.  you will need the the inside diameter which is best determined by measuring the outside diameter of the inner tube.  you will need the height which is generally not critical.  and finally you will need the maximum and minimun outside diameters. 

[jaypeegee]

Hi

ereplacement shows a bearing with what looks like

IWG1216 on it. It is made by Koyo

http://www.ereplacementparts.com/anti-reverse-bearing-p-1425478.html

I tried to work backwards from Boca with that presuming that the 12 16 equated to 12 ID and 16 OD

My reel is at the local depot so will pick up tonight and check.