Lube on New but Idle Reels

Started by Jayce, December 18, 2014, 01:49:11 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Jayce

Hi,

Do you advice to flush and re-lube new but idle reels (sitting on store shelf or box) ?

Background:
I got a new spinning reel for my bass fishing and based on the info its a 2005 model.
When I got it the box was all dusty but still sealed.  No idea how was it stored and where.
The guy said about 7+ years it was in the store.  Must have been buried in their back room or something.
I did the usual checking and it still feels smooth with no abnormal sound or feeling when cranking.

Will the grease/lube be caked, dried up or lost its lubricating characteristics during its long hibernation ?


Keta

You should always do a pre use service.
Hi, my name is Lee and I have a fishing gear problem.

I have all of the answers, yup, no, maybe.

A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain

ReelClean

I would just break it down anyway, if only to put some corrosion x in and pack the bearings properly, but I guess it depends on how comfortable you are working on your reels.   If your are a reelhead like a lot of us here and just like pulling down reels then  it's a no-brainer  :-)
Cheers
Steve
Specialist Daiwa reel service, including Magseal, MQ series body plates, and every other "improvement" that Daiwa Marketing (sorry... I meant Engineering) Dept comes up with!