Question re 113 metal drag washers...

Started by Aiala, January 17, 2015, 08:20:12 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Aiala

January 17, 2015, 08:20:12 PM
Honorable Senseis:
Where in a stock 113H drag stack sequence should the thicker metal keyed (non-eared) washer go?   ???

Thank you!
~A~
I don't suffer from insanity... I enjoy every minute of it!  :D

Shark Hunter

#1
January 17, 2015, 08:45:46 PM
Last
Life is Good!

Alto Mare

#2
January 17, 2015, 11:23:08 PM
Aiala, If you replace that washer with one of these, you'll be happy, but you will also need a delrin for under the gear
http://www.mcmaster.com/#3573A17
Forget about all the reasons why something may not work. You only need to find one good reason why it will.
Print
Go Up Pages1
User actions